Omitting a Specific Color

This section describes the procedure for setting to omit borders and ruled lines of a specified color (red, green, or blue) from the scanned image.

Enhancing the Red Color

This section describes the procedure for setting the scanner to enhance the color red when performing black-and-white scanning.

NOTE

If you select [24-bit Color] or [Auto Color Detection] from the Mode drop-down list in the [Basic] tab, you cannot specify this setting.

1Click the [Image processing] tab in the Properties for Canon DR-3010C dialog box select the color to omit from the Front and Back drop-down lists under <Color drop-out> click [OK].

NOTE

You can specify different settings for the front and back side of the document.

NOTE

If you select [24-bit Color] or [Auto Color Detection] from the Mode drop-down list in the [Basic] tab, you cannot specify this setting.

1Click the [Image processing] tab in the Properties for Canon DR-3010C dialog box select [Red Enhance] from the Front and Back drop-down lists under <Color drop-out> click [OK].

NOTE

You can set specify different settings for the front and back side of the document.

51

DR-3010C

Page 51
Image 51
Canon DR-3010C user manual Omitting a Specific Color, Enhancing the Red Color