Panasonic DMC-XS1GA, DMC-XS1GN, DMC-XS1GF, DMC-XS1GC, DMC-XS1PU, DMCXS1K Display the Initial Setting

Page 10

•Step 4. Display the INITIAL SETTING:

While pressing [ MENU/SET ] button and “[ RIGHT ] of Cursor button” simultaneously, turn the Power off. The “INITIAL SETTINGS” menu is displayed.

There are two kinds of “INITIAL SETTINGS” menu form as follows:

[CASE 1. After replacing Main P.C.B.]

When Main P.C.B. has just been replaced, all of the model suffix is displayed as follows. (Five pages in total)

[CASE 2. Other than “After replacing Main P.C.B.”]

•Step 5. Choose the model suffix in “INITIAL SETTINGS”: (Refer to “CAUTION 1”)

[Caution: After replacing Main P.C.B.]

The model suffix can been chosen, JUST ONE TIME.

Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can not be changed. Therefore, select the area carefully.

Select the area with pressing “[ UP ] / [ DOWN ] of Cursor buttons”.

10

Image 10

Contents Model No. DMC-XS1P Table of Contents Leakage Current Cold Check Safety PrecautionsGeneral Guidelines Leakage Current Hot Check See FigureHow to Discharge the E.Capacitor on Flash Top P.C.B Fig. F1How to Recycle the Lithium Ion Battery U.S. Only Service Navigation Introduction Important NoticeRecommended Lead Free Solder Service Parts Route General Description About Lead Free Solder PbFHow to Define the Model Suffix Ntsc or PAL model Defining methodsCancellation of Initial Settings Temporary cancellation of Initial SettingsTurn the Power on Turn the Power on Display the Initial Setting Choose the model suffix in Initial Settings Refer to CautionDefault setting After Initial Settings ConfirmationSpecifications Location of Controls and Components Page How to display Service ModeError Code Memory Function Execute the error code display modeError Code List How to exit from Error Code display mode Important notice about Error Code List About * indicationAbout ? indication 18*0 0?01 to 18*0 0?60 Service Fixture and Tools Service Fixture & ToolsWhen Replacing the Main P.C.B Service Position Disassembly Flow Chart Disassembly and Assembly InstructionsP.C.B. Location Disassembly Procedure Removal of the Rear Case UnitRemoval of the Rear Op Plate Unit Fig. D2Removal of the Front Case Unit Removal of the LCD Unit Fig. D4Removal of the Frame Plate Removal of the Top Case UnitRemoval of the Main P.C.B. SpeakerFig. D12 Removal of the Battery Door Unit Fig. D13Removal of the CCD FPC Unit Fig. D14Introduction Measurements and AdjustmentsInitial Setting Release Before Disassembling the unitRombackup Method of Non-PC backup Flash-ROM Data BackupLight Box Startup Electrical Adjustment mode Details of Electrical AdjustmentHow to execute the Electrical Adjustment Status Adjustment Flag SettingExecute Adjustment Case of OIS Adjustment Finalizing the AdjustmentAdjustment Specifications Page After Adjustment Initial SettingMaintenance Cleaning Lens and LCD PanelBlock Diagram Overall Block DiagramFlash / Top Block Diagram Sub Operation Block DiagramWiring Connection Diagram Interconnection Diagram