Panasonic DMC-XS1EG, DMC-XS1GN, DMC-XS1GF, DMC-XS1GC manual Maintenance, Cleaning Lens and LCD Panel

Page 36

10 Maintenance

10.1. Cleaning Lens and LCD Panel

Do not touch the surface of lens and LCD Panel with your hand. When cleaning the lens, use air-Blower to blow off the dust.

When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the its surface.

Note:

The Lens Cleaning KIT ; VFK1900BK (Only supplied as 10 set/Box) is available as Service Aid.

36

Image 36

Contents Model No. DMC-XS1P Table of Contents Safety Precautions General GuidelinesLeakage Current Cold Check Leakage Current Hot Check See FigureHow to Discharge the E.Capacitor on Flash Top P.C.B Fig. F1How to Recycle the Lithium Ion Battery U.S. Only Service Navigation Introduction Important NoticeRecommended Lead Free Solder Service Parts Route General Description About Lead Free Solder PbFHow to Define the Model Suffix Ntsc or PAL model Defining methodsTemporary cancellation of Initial Settings Cancellation of Initial SettingsTurn the Power on Turn the Power on Display the Initial Setting Choose the model suffix in Initial Settings Refer to CautionDefault setting After Initial Settings ConfirmationSpecifications Location of Controls and Components Page Service Mode Error Code Memory FunctionHow to display Execute the error code display modeError Code List Important notice about Error Code List About * indication How to exit from Error Code display modeAbout ? indication 18*0 0?01 to 18*0 0?60 Service Fixture & Tools Service Fixture and ToolsWhen Replacing the Main P.C.B Service Position Disassembly and Assembly Instructions Disassembly Flow ChartP.C.B. Location Disassembly Procedure Removal of the Rear Case UnitRemoval of the Rear Op Plate Unit Fig. D2Removal of the Front Case Unit Removal of the LCD Unit Fig. D4Removal of the Frame Plate Removal of the Top Case UnitRemoval of the Main P.C.B. SpeakerFig. D12 Removal of the Battery Door Unit Fig. D13Removal of the CCD FPC Unit Fig. D14Measurements and Adjustments Initial Setting ReleaseIntroduction Before Disassembling the unitFlash-ROM Data Backup Rombackup Method of Non-PC backupLight Box Details of Electrical Adjustment How to execute the Electrical AdjustmentStartup Electrical Adjustment mode Status Adjustment Flag SettingExecute Adjustment Case of OIS Adjustment Finalizing the AdjustmentAdjustment Specifications Page After Adjustment Initial SettingMaintenance Cleaning Lens and LCD PanelBlock Diagram Overall Block DiagramFlash / Top Block Diagram Sub Operation Block DiagramWiring Connection Diagram Interconnection Diagram