Panasonic DMC-XS1EF, DMC-XS1GN How to Define the Model Suffix Ntsc or PAL model, Defining methods

Page 8

3.4.How to Define the Model Suffix (NTSC or PAL model)

There are seven kinds of DMC-XS1, regardless of the colours.

•a) DMC-XS1 (Japan domestic model)

•b) DMC-XS1P/PC

•c) DMC-XS1EB/EF/EG/EP

•d) DMC-XS1EE

•e) DMC-XS1GT

•f) DMC-XS1GN

•g) DMC-XS1PU/GA/GC/GF/GK

What is the difference is that the “INITIAL SETTINGS” data which is stored in Flash-ROM mounted on Main P.C.B..

3.4.1.Defining methods:

To define the model suffix to be serviced, refer to the nameplate which is putted on the bottom side of the Unit.

NOTE:

After replacing the Main P.C.B., be sure to achieve adjustment.

The service software is available at “TSN Website”.

8

Image 8

Contents Model No. DMC-XS1P Table of Contents Safety Precautions General GuidelinesLeakage Current Cold Check Leakage Current Hot Check See FigureHow to Discharge the E.Capacitor on Flash Top P.C.B Fig. F1How to Recycle the Lithium Ion Battery U.S. Only Service Navigation Introduction Important NoticeRecommended Lead Free Solder Service Parts Route General Description About Lead Free Solder PbFHow to Define the Model Suffix Ntsc or PAL model Defining methodsTurn the Power on Turn the Power on Temporary cancellation of Initial SettingsCancellation of Initial Settings Display the Initial Setting Choose the model suffix in Initial Settings Refer to CautionDefault setting After Initial Settings ConfirmationSpecifications Location of Controls and Components Page Service Mode Error Code Memory FunctionHow to display Execute the error code display modeError Code List About ? indication 18*0 0?01 to 18*0 0?60 Important notice about Error Code List About * indicationHow to exit from Error Code display mode When Replacing the Main P.C.B Service Fixture & ToolsService Fixture and Tools Service Position P.C.B. Location Disassembly and Assembly InstructionsDisassembly Flow Chart Disassembly Procedure Removal of the Rear Case UnitRemoval of the Rear Op Plate Unit Fig. D2Removal of the Front Case Unit Removal of the LCD Unit Fig. D4Removal of the Frame Plate Removal of the Top Case UnitRemoval of the Main P.C.B. SpeakerFig. D12 Removal of the Battery Door Unit Fig. D13Removal of the CCD FPC Unit Fig. D14Measurements and Adjustments Initial Setting ReleaseIntroduction Before Disassembling the unitLight Box Flash-ROM Data BackupRombackup Method of Non-PC backup Details of Electrical Adjustment How to execute the Electrical AdjustmentStartup Electrical Adjustment mode Status Adjustment Flag SettingExecute Adjustment Case of OIS Adjustment Finalizing the AdjustmentAdjustment Specifications Page After Adjustment Initial SettingMaintenance Cleaning Lens and LCD PanelBlock Diagram Overall Block DiagramFlash / Top Block Diagram Sub Operation Block DiagramWiring Connection Diagram Interconnection Diagram