Panasonic DMC-XS1GC, DMC-XS1GN, DMC-XS1P Important notice about Error Code List About * indication

Page 17

Important notice about “Error Code List”

1) About “*” indication:

The third digit from the left is different as follows.

-In case of 0 (example: 18001000)

When the third digit from the left shows “0”, this error occurred under the condition of INITIAL SETTINGS has been completed.

It means that this error is occurred basically at user side.

-In case of 8 (example: 18801000)

When the third digit from the left shows “8”, this error occurred under the condition of INITIAL SETTINGS has been released.

(Example; Factory assembling-line before unit shipment, Service mode etc.) It means that this error is occurred at service side.

2)About “?” indication: (“180 0?01” to “180 0?60”):

The third digit from the right shows one of the hexadecimal (“0” to “F”) character.

•Step 3. How to exit from Error Code display mode:

Simply, turn the power off. (Since Error code display mode is executed under the condition of temporary cancellation of “INI- TIAL SETTINGS”, it wake up with normal condition when turn off the power.)

NOTE:

The error code can not be initialized.

17

Image 17

Contents Model No. DMC-XS1P Table of Contents General Guidelines Safety PrecautionsLeakage Current Cold Check Leakage Current Hot Check See FigureFig. F1 How to Discharge the E.Capacitor on Flash Top P.C.BHow to Recycle the Lithium Ion Battery U.S. Only Introduction Important Notice Service NavigationGeneral Description About Lead Free Solder PbF Recommended Lead Free Solder Service Parts RouteDefining methods How to Define the Model Suffix Ntsc or PAL modelTurn the Power on Turn the Power on Temporary cancellation of Initial SettingsCancellation of Initial Settings Choose the model suffix in Initial Settings Refer to Caution Display the Initial SettingConfirmation Default setting After Initial SettingsSpecifications Location of Controls and Components Page Error Code Memory Function Service ModeHow to display Execute the error code display modeError Code List About ? indication 18*0 0?01 to 18*0 0?60 Important notice about Error Code List About * indicationHow to exit from Error Code display mode When Replacing the Main P.C.B Service Fixture & ToolsService Fixture and Tools Service Position P.C.B. Location Disassembly and Assembly InstructionsDisassembly Flow Chart Removal of the Rear Case Unit Disassembly ProcedureFig. D2 Removal of the Rear Op Plate UnitFig. D4 Removal of the Front Case Unit Removal of the LCD UnitRemoval of the Top Case Unit Removal of the Frame PlateSpeaker Removal of the Main P.C.B.Fig. D12 Fig. D13 Removal of the Battery Door UnitFig. D14 Removal of the CCD FPC UnitInitial Setting Release Measurements and AdjustmentsIntroduction Before Disassembling the unitLight Box Flash-ROM Data BackupRombackup Method of Non-PC backup How to execute the Electrical Adjustment Details of Electrical AdjustmentStartup Electrical Adjustment mode Status Adjustment Flag SettingFinalizing the Adjustment Execute Adjustment Case of OIS AdjustmentAdjustment Specifications Page Initial Setting After AdjustmentCleaning Lens and LCD Panel MaintenanceOverall Block Diagram Block DiagramSub Operation Block Diagram Flash / Top Block DiagramInterconnection Diagram Wiring Connection Diagram