Panasonic DMC-XS1GA, DMC-XS1GN, DMC-XS1GF, DMC-XS1GC, DMC-XS1PU Removal of the Main P.C.B, Speaker

Page 25

8.3.7. Removal of the Flash Top P.C.B.

8.3.8. Removal of the Lens Unit (W/CCD)

(Fig. D10)

8.3.9. Removal of the Main P.C.B. and

(Fig. D9)	Speaker

(Fig. D11)

25

Image 25

Contents Model No. DMC-XS1P Table of Contents General Guidelines Safety PrecautionsLeakage Current Cold Check Leakage Current Hot Check See FigureFig. F1 How to Discharge the E.Capacitor on Flash Top P.C.BHow to Recycle the Lithium Ion Battery U.S. Only Introduction Important Notice Service NavigationGeneral Description About Lead Free Solder PbF Recommended Lead Free Solder Service Parts RouteDefining methods How to Define the Model Suffix Ntsc or PAL modelCancellation of Initial Settings Temporary cancellation of Initial SettingsTurn the Power on Turn the Power on Choose the model suffix in Initial Settings Refer to Caution Display the Initial SettingConfirmation Default setting After Initial SettingsSpecifications Location of Controls and Components Page Error Code Memory Function Service ModeHow to display Execute the error code display modeError Code List How to exit from Error Code display mode Important notice about Error Code List About * indicationAbout ? indication 18*0 0?01 to 18*0 0?60 Service Fixture and Tools Service Fixture & ToolsWhen Replacing the Main P.C.B Service Position Disassembly Flow Chart Disassembly and Assembly InstructionsP.C.B. Location Removal of the Rear Case Unit Disassembly ProcedureFig. D2 Removal of the Rear Op Plate UnitFig. D4 Removal of the Front Case Unit Removal of the LCD UnitRemoval of the Top Case Unit Removal of the Frame PlateSpeaker Removal of the Main P.C.B.Fig. D12 Fig. D13 Removal of the Battery Door UnitFig. D14 Removal of the CCD FPC UnitInitial Setting Release Measurements and AdjustmentsIntroduction Before Disassembling the unitRombackup Method of Non-PC backup Flash-ROM Data BackupLight Box How to execute the Electrical Adjustment Details of Electrical AdjustmentStartup Electrical Adjustment mode Status Adjustment Flag SettingFinalizing the Adjustment Execute Adjustment Case of OIS AdjustmentAdjustment Specifications Page Initial Setting After AdjustmentCleaning Lens and LCD Panel MaintenanceOverall Block Diagram Block DiagramSub Operation Block Diagram Flash / Top Block DiagramInterconnection Diagram Wiring Connection Diagram