Axis Communications Q6045S Network Share, Go to System Options Storage and click SD Card

Page 54

AXIS Q6045–S PTZ Dome Network Camera

System Options

•ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

•vFAT — most SD cards are pre-formatted with vFAT when purchased.

If required, the SD card can be manually formatted to the desired file system. To format the SD card:

1.Insert the SD card in the SD card slot.

2.Go to System Options > Storage and click SD Card.

3.Click Format and select the desired file system.

Note

During formatting any previous data stored on the disk will be lost.

Mounting is done automatically when the card is inserted or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1.Go to System Options > Storage and click SD Card.

2.Click Unmount.

3.The card can now be removed.

The SD card is managed on the System Options > Storage page. Click SD Card to open Storage Management.

If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair. This option is only available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.

To avoid filling the card, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the card and protect recordings from being removed, select Lock under Recording Settings.

Network Share

Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to www.axis.com/products/cam_companion_software/supported.htm

To add a network share:

1.Go to System Options > Storage.

2.Click Network Share.

3.Enter the IP address, DNS or Bonjour name to the host server in the Host field.

4.Enter the name of the share in the Share field. Sub folders cannot be used.

5.If required, select The share requires login and enter the user name and password.

6.Click Connect.

To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools.

To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Axis Q6045-S PTZ Dome Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q6045-S PTZ Dome Network CameraSupport Advanced Reset to Factory Default Settings Media Converter Switch Connectors Performance ConsiderationsHardware Overview Hardware OverviewPressurize the Camera Recommended Multi-connector Connectors and ButtonsLED Indicators SD Card SlotHardware Overview Media Converter Switch Media Converter Switch ConnectorsNetwork Connector Dip Switches Dip switch positionConnector internal 2-pin I/O terminal block Media Converter Switch LED Indicators DescriptionAccess from a Browser Accessing the ProductAccessing the Product Start a browser Internet Explorer, Firefox, SafariAccessing the Product Access from the Internet Set the Root PasswordClick Use Https Controls on the Live View Accessing the Product Live ViewGo to Setup Events Manual TriggerAxis Media Control viewer toolbar PTZ ControlsAxis Q6045-S PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis Q6045-S PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video Stream VideoVideo Pixel CounterImage Click Save to apply the new settingsStream Profiles 264Image Appearance Camera SettingsExposure Settings White BalanceOverlay Image Image SettingsOverlay Go to Video Video Stream and select the Image tabUsing Overlay Text in an Action Rule Privacy MaskGo to Events Action Rules Axis Q6045-S PTZ Dome Network Camera Live View Config Live View ConfigUser Defined Links Default Viewer for BrowsersViewer Settings Output ButtonsGo to Setup Live View Config PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomAutotracking ConfigurationPTZ Pan Tilt Zoom Gatekeeper Exclude AreasTo add a guard tour Guard TourTour Recording To add a recorded tourOsdi Zones AdvancedLimits Operator Same as administrator but with lower priority Control QueueControls Detectors Set Up Motion Detection WindowsDetectors Shock DetectionObject Removed Motion Detection ParametersEnter/Exit Detector Fence DetectorObject Counter Applications Install ApplicationApplications Application LicensesAxis Q6045-S PTZ Dome Network Camera Events Input SignalEvents DetectorsSystem Setting Up an Action RuleStorage TimeGo to Events Action Rules and click Add RecipientsFallback Action RecipientGo to Events Recipients and click Add Setting Up an Email RecipientSchedules Go to Events Schedules and click AddRecurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersIeee CertificatesGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsGo to Setup System Options Security Certificates NetworkAssign IP Address Using ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 StorageUPnPTM BonjourTo add a network share Network ShareGo to System Options Storage and click SD Card Go to System Options Storage Click Network ShareMaintenance System Options Ports & DevicesSupport Scripting Plain ConfigLogs & Reports File UploadSystem Options Reset to Factory Default Settings Function Pin wire Specifications Multi-Connector CableMulti-Connector Cable Activated, floating unconnected when Drain, 100 mAEmergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareWhen using ARP/Ping Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserProduct is accessible locally but not externally Problems with streaming H.264Basic Storage and disk management problems Video and image problems, generalVideo Camera Settings Media converter switchTechnical Specifications Technical SpecificationsMaintenance Function/group Specifications System ApplicationInstallation aid Integration Programming InterfaceConnectors Function/group Specifications General CasingPower WeightTechnical Specifications Media Converter Switch Connectors Camera ConnectorsExternal Connectors Performance Considerations Collector 100 mAM1.7
Top Page Image Contents