Axis Communications Q6045S Connectors and Buttons, LED Indicators, Multi-connector, SD Card Slot

Page 7

AXIS Q6045–S PTZ Dome Network Camera

Hardware Overview

5.Keep the gas flowing through the camera housing for one minute before removing the chuck from the inlet valve.

6.Lift the pressure relief valve to let the overpressure out of the camera unit.

7.Repeat the filling process a total of 3 times, leaving the the camera pressurized the last time.

8.Put the caps back on the inlet valve and the pressure relief valve.

Connectors and Buttons

For technical specifications, see page 63.

Multi-connector

Terminal connector for connecting the supplied media converter switch, which provides the following signals:

•DC Power

•Network (Ethernet 10/100Base-T)

•Input/Output (I/O)

The supplied multi-connector cable is required in order to maintain the product’s IP rating, see Multi-Connector Cable, on page 58.

SD Card Slot

An SD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Control Button

The control button is used for:

•Resetting the product to factory default settings. See page 57.

•Connecting to an AXIS Video Hosting System service. See page 50. To connect, press and hold the button for about 1 second until the Status LED flashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 50. To connect, press and hold the button for about 3 seconds.

LED Indicators

LED	Color	Indication

Status	Unlit	Connection and normal operation

	Amber	Steady during startup. Flashes during firmware upgrade.

	Amber/red	Flashes amber/red if network connection is unavailable or lost.

	Red	Flashes red for firmware upgrade failure.

	Green	Shows steady green for 10 seconds for normal operation after restart.

7

Image 7

Contents Axis Q6045-S PTZ Dome Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q6045-S PTZ Dome Network Camera Table of ContentsMedia Converter Switch Connectors Performance Considerations Support Advanced Reset to Factory Default SettingsHardware Overview Hardware OverviewPressurize the Camera Recommended SD Card Slot Connectors and ButtonsLED Indicators Multi-connectorMedia Converter Switch Connectors Hardware Overview Media Converter SwitchDip switch position Network Connector Dip SwitchesConnector internal 2-pin I/O terminal block Description Media Converter Switch LED IndicatorsStart a browser Internet Explorer, Firefox, Safari Accessing the ProductAccessing the Product Access from a BrowserSet the Root Password Accessing the Product Access from the InternetClick Use Https Manual Trigger Accessing the Product Live ViewGo to Setup Events Controls on the Live ViewPTZ Controls Axis Media Control viewer toolbarAxis Q6045-S PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis Q6045-S PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Pixel Counter VideoVideo Video Stream264 Click Save to apply the new settingsStream Profiles ImageWhite Balance Camera SettingsExposure Settings Image AppearanceGo to Video Video Stream and select the Image tab Image SettingsOverlay Overlay ImagePrivacy Mask Using Overlay Text in an Action RuleGo to Events Action Rules Axis Q6045-S PTZ Dome Network Camera Live View Config Live View ConfigOutput Buttons Default Viewer for BrowsersViewer Settings User Defined LinksGo to Setup Live View Config PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomExclude Areas ConfigurationPTZ Pan Tilt Zoom Gatekeeper AutotrackingTo add a recorded tour Guard TourTour Recording To add a guard tourAdvanced Osdi ZonesLimits Control Queue Operator Same as administrator but with lower priorityControls Shock Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Object RemovedFence Detector Enter/Exit DetectorObject Counter Application Licenses Install ApplicationApplications ApplicationsAxis Q6045-S PTZ Dome Network Camera Detectors Input SignalEvents EventsTime Setting Up an Action RuleStorage SystemRecipient RecipientsFallback Action Go to Events Action Rules and click AddGo to Events Schedules and click Add Setting Up an Email RecipientSchedules Go to Events Recipients and click AddGo to Events Recurrences and click Add RecurrencesContinuous Recording RecordingsRecordings Recording ListLanguages LanguagesUsers System OptionsSystem Options SecurityCertificates IeeeGo to System Options Security Ieee Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & TimeARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Go to System Options Storage Click Network Share Network ShareGo to System Options Storage and click SD Card To add a network shareSystem Options Ports & Devices MaintenanceSupport File Upload Plain ConfigLogs & Reports ScriptingSystem Options Reset to Factory Default Settings Activated, floating unconnected when Drain, 100 mA Multi-Connector CableMulti-Connector Cable Function Pin wire SpecificationsChecking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address When using ARP/PingProblems with streaming H.264 Product is accessible locally but not externallyBasic Media converter switch Video and image problems, generalVideo Camera Settings Storage and disk management problemsTechnical Specifications Technical SpecificationsIntegration Programming Interface Function/group Specifications System ApplicationInstallation aid MaintenanceWeight Function/group Specifications General CasingPower ConnectorsCamera Connectors Technical Specifications Media Converter Switch ConnectorsExternal Connectors Collector 100 mA Performance ConsiderationsM1.7