Axis Communications Q6045S user manual System Options Ports & Devices, Maintenance, Support

Page 55

AXIS Q6045–S PTZ Dome Network Camera

System Options

Ports & Devices

I/O Ports

The media converter switch provides two configurable input and output ports for connection of external devices. One port is dedicated for the I/O signals between the media converter switch, the supplied multi-connector cable and the camera. For more information about the multi-connector cable, see page 58.

The I/O ports are configured under System Options > Ports & Devices > I/O Ports. Select the port direction (Input or Output). The ports can be given descriptive names and their Normal states can be configured as Open circuit or Grounded circuit.

Port Status

The list on the System Options > Ports & Devices > Port Status page shows the status of the product’s input and output ports.

Maintenance

The Axis product provides several maintenance functions. These are available under System Options > Maintenance.

Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings.

Click Restore to reset most settings to the factory default values. The following settings are not affected:

•the boot protocol (DHCP or static)

•the static IP address

•the default router

•the subnet mask

•the system time

•the IEEE 802.1X settings

•uploaded applications are kept but must be restarted

Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The Axis product can also be reset to factory default using the control button, see Reset to Factory Default Settings, on page 57.

To test the product’s PTZ mechanics, click Test under PTZ Status.

For information about firmware upgrade, see Upgrading the Firmware, on page 59.

Support

Support Overview

The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance.

See also Troubleshooting, on page 59.

System Overview

To get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview. Information that can be found here includes firmware version, IP address, network and security settings, event settings, image settings and recent log items. Many of the captions are links to the proper Setup page.

55

Image 55

Contents Axis Q6045-S PTZ Dome Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q6045-S PTZ Dome Network Camera Table of ContentsMedia Converter Switch Connectors Performance Considerations Support Advanced Reset to Factory Default SettingsHardware Overview Hardware OverviewPressurize the Camera Recommended SD Card Slot Connectors and ButtonsLED Indicators Multi-connectorMedia Converter Switch Connectors Hardware Overview Media Converter SwitchDip switch position Network Connector Dip SwitchesConnector internal 2-pin I/O terminal block Description Media Converter Switch LED IndicatorsStart a browser Internet Explorer, Firefox, Safari Accessing the ProductAccessing the Product Access from a BrowserSet the Root Password Accessing the Product Access from the InternetClick Use Https Manual Trigger Accessing the Product Live ViewGo to Setup Events Controls on the Live ViewPTZ Controls Axis Media Control viewer toolbarAxis Q6045-S PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis Q6045-S PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Pixel Counter VideoVideo Video Stream264 Click Save to apply the new settingsStream Profiles ImageWhite Balance Camera SettingsExposure Settings Image AppearanceGo to Video Video Stream and select the Image tab Image SettingsOverlay Overlay ImagePrivacy Mask Using Overlay Text in an Action RuleGo to Events Action Rules Axis Q6045-S PTZ Dome Network Camera Live View Config Live View ConfigOutput Buttons Default Viewer for BrowsersViewer Settings User Defined LinksGo to Setup Live View Config PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomExclude Areas ConfigurationPTZ Pan Tilt Zoom Gatekeeper AutotrackingTo add a recorded tour Guard TourTour Recording To add a guard tourAdvanced Osdi ZonesLimits Control Queue Operator Same as administrator but with lower priorityControls Shock Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Object RemovedFence Detector Enter/Exit DetectorObject Counter Application Licenses Install ApplicationApplications ApplicationsAxis Q6045-S PTZ Dome Network Camera Detectors Input SignalEvents EventsTime Setting Up an Action RuleStorage SystemRecipient RecipientsFallback Action Go to Events Action Rules and click AddGo to Events Schedules and click Add Setting Up an Email RecipientSchedules Go to Events Recipients and click AddGo to Events Recurrences and click Add RecurrencesContinuous Recording RecordingsRecordings Recording ListLanguages LanguagesUsers System OptionsSystem Options SecurityCertificates IeeeGo to System Options Security Ieee Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & TimeARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Go to System Options Storage Click Network Share Network ShareGo to System Options Storage and click SD Card To add a network shareSystem Options Ports & Devices MaintenanceSupport File Upload Plain ConfigLogs & Reports ScriptingSystem Options Reset to Factory Default Settings Activated, floating unconnected when Drain, 100 mA Multi-Connector CableMulti-Connector Cable Function Pin wire SpecificationsChecking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address When using ARP/PingProblems with streaming H.264 Product is accessible locally but not externallyBasic Media converter switch Video and image problems, generalVideo Camera Settings Storage and disk management problemsTechnical Specifications Technical SpecificationsIntegration Programming Interface Function/group Specifications System ApplicationInstallation aid MaintenanceWeight Function/group Specifications General CasingPower ConnectorsCamera Connectors Technical Specifications Media Converter Switch ConnectorsExternal Connectors Collector 100 mA Performance ConsiderationsM1.7