Axis Communications Q6045S user manual System Options Reset to Factory Default Settings

Page 57

AXIS Q6045–S PTZ Dome Network Camera

System Options

Reset to Factory Default Settings

Important

Reset to factory default should be used with caution. A reset to factory default will reset all settings, including the IP address, to the factory default values.

Note

The installation and management software tools are available on the CD supplied with the product and from the support pages on www.axis.com/techsup

To reset the product to the factory default settings:

1.Disconnect power from the product.

2.Press and hold the control button and reconnect power. See Hardware Overview, on page 6 .

3.Keep the control button pressed for about 15–30 seconds until the status LED indicator flashes amber.

4.Release the control button. The process is complete when the status LED indicator turns green. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90

5.Using the installation and management software tools, assign an IP address, set the password, and access the video stream. It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.

57

Image 57

Contents Axis Q6045-S PTZ Dome Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q6045-S PTZ Dome Network Camera Table of ContentsMedia Converter Switch Connectors Performance Considerations Support Advanced Reset to Factory Default SettingsHardware Overview Hardware OverviewPressurize the Camera Recommended LED Indicators Connectors and ButtonsMulti-connector SD Card SlotMedia Converter Switch Connectors Hardware Overview Media Converter SwitchNetwork Connector Dip Switches Dip switch positionConnector internal 2-pin I/O terminal block Description Media Converter Switch LED IndicatorsAccessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariAccessing the Product Access from the Internet Set the Root PasswordClick Use Https Go to Setup Events Accessing the Product Live ViewControls on the Live View Manual TriggerPTZ Controls Axis Media Control viewer toolbarAxis Q6045-S PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis Q6045-S PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterStream Profiles Click Save to apply the new settingsImage 264Exposure Settings Camera SettingsImage Appearance White BalanceOverlay Image SettingsOverlay Image Go to Video Video Stream and select the Image tabUsing Overlay Text in an Action Rule Privacy MaskGo to Events Action Rules Axis Q6045-S PTZ Dome Network Camera Live View Config Live View ConfigViewer Settings Default Viewer for BrowsersUser Defined Links Output ButtonsGo to Setup Live View Config Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Gatekeeper ConfigurationAutotracking Exclude AreasTour Recording Guard TourTo add a guard tour To add a recorded tourOsdi Zones AdvancedLimits Operator Same as administrator but with lower priority Control QueueControls Detectors Set Up Motion Detection WindowsDetectors Shock DetectionMotion Detection Parameters Object RemovedEnter/Exit Detector Fence DetectorObject Counter Applications Install ApplicationApplications Application LicensesAxis Q6045-S PTZ Dome Network Camera Events Input SignalEvents DetectorsStorage Setting Up an Action RuleSystem TimeFallback Action RecipientsGo to Events Action Rules and click Add RecipientSchedules Setting Up an Email RecipientGo to Events Recipients and click Add Go to Events Schedules and click AddGo to Events Recurrences and click Add RecurrencesRecordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM StorageRTP/H.264 Bonjour Go to System Options Storage and click SD Card Network Share To add a network share Go to System Options Storage Click Network ShareMaintenance System Options Ports & DevicesSupport Logs & Reports Plain ConfigScripting File UploadSystem Options Reset to Factory Default Settings Multi-Connector Cable Multi-Connector CableFunction Pin wire Specifications Activated, floating unconnected when Drain, 100 mATroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsWhen using ARP/Ping Product cannot be accessed from a browserProduct is accessible locally but not externally Problems with streaming H.264Basic Video Camera Settings Video and image problems, generalStorage and disk management problems Media converter switchTechnical Specifications Technical SpecificationsInstallation aid Function/group Specifications System ApplicationMaintenance Integration Programming InterfacePower Function/group Specifications General CasingConnectors WeightTechnical Specifications Media Converter Switch Connectors Camera ConnectorsExternal Connectors Collector 100 mA Performance ConsiderationsM1.7