AXIS Q6045–S PTZ Dome Network Camera
PTZ (Pan Tilt Zoom)
1.Go to PTZ > Guard Tour and click Add.
2.Select Create a record tour and click OK.
3.Enter a descriptive name.
4.Specify the pause length between runs.
5.Click
to start recording the Pan/Tilt/Zoom movements.
6.When satisfied, click
.
7.Click OK.
Note
Only the name of the recorded tour and pause between runs can be modified. Starting a new recording will overwrite the existing guard tour.
The recorded tour can be activated from the Live View and Guard Tour pages or through events. For more information see
the online help 
.
OSDI Zones
OSDI zones are set up under PTZ > OSDI Zones. The Axis product uses the coordinates of the center of the view to set the lower left and upper right zone areas. First navigate to where you would like the lowermost left point of the OSDI zone to be located. Click Get to set the coordinates. Proceed to where the upper right point of zone should be located and click Get. Give the zone a descriptive name and click OK.
To include the name of the OSDI zone in the overlay text, go to Video < Video Stream < Overlay Settings. Check the Include text box and enter the modifier #L in the field. For more information about modifiers, see File Naming & Date/Time Formats in
the online help 
.
Advanced
Limits
Define the pan, tilt, zoom and focus limits for the Axis product. Movements to the left and right, up and down, can be restricted to narrow the area under surveillance.
Configure the near focus limit to avoid focusing on objects too close to the camera lens.
When Enable
Move speed sets the speed of the camera’s pan and tilt movements. The default setting is maximum speed.
When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.e. the speed the camera view moves at when the joystick is pushed all the way out in any direction. This is useful then the view is zoomed in on an object.
See the online help 
for more information.
32