Axis Communications Q6044-C user manual Stream Profiles, Camera Settings

Page 21

AXIS Q6044-C PTZ Dome Network Camera

Video

size optimizes bandwidth and storage usage, but may give poor image quality. To prevent increased bandwidth and storage usage, the maximum frame size should be set to an optimal value.

Stream Profiles

A stream profile is a set of predefined stream settings including resolution, compression, frame rate and overlay settings. Stream profiles can be used:

When setting up recording using action rules. See Events on page 37.

When setting up continuous recording. See Continuous Recording on page 42.

In the Live View page – select the stream profile from the Stream profile drop-down list.

For quick setup, use one of the predefined stream profiles. Each predefined profile has a descriptive name, indicating its purpose. If required, the predefined stream profiles can be modified and new customized stream profiles can be created.

To create a new profile or modify an existing profile, go to Setup > Video > Stream Profiles.

To select a default stream profile for the Live View page, go to Setup > Live View Config .

Camera Settings

The Video > Camera Settings page provides access to advanced image settings for the Axis product.

Image Appearance

Increasing the Color level increases the color saturation. The value 100 gives maximum color saturation. The value 0 gives a black and white image.

The image Brightness can be adjusted in the range 0–100, where a higher value produces a brighter image.

Increasing the Sharpness can increase bandwidth usage. A sharper image might increase image noise especially in low light conditions. A lower setting reduces image noise, but the whole image will appear less sharp.

White Balance

White balance is used to make colors in the image appear the same regardless of the color temperature of the light source. The Axis product can be set to automatically identify the light source and compensate for its color. Alternatively, select the type of light

source from the drop-down list. For a description of each available setting, see the online help.

Wide Dynamic Range

Wide dynamic range can improve the exposure when there is a considerable contrast between light and dark areas in the image. Enable WDR in intense backlight conditions. The different WDR settings adjust for various amounts of contrast in the image. Use a higher WDR number for a higher contrast. Disable WDR in low light conditions for optimal exposure.

Exposure Settings

Exposure control - These settings is used to adapt to the amount of light used. Automatic is the default setting and it can be used in most situations. The shutter speed is automatically set to produce optimum image quality. Use Manual if you have special requirements for the exposure setting and wish to lock it. Select the desired exposure time from the drop-down list.

Max exposure time - Select the maximum exposure time from the drop-down list. Increasing the exposure time will improve image quality, but decrease the frame rate. There may also be an increase in motion blur. Checking Allow slow shutter decreases the shutter speed in low light to improve image brightness.

Enable Backlight compensation - Select Enable Backlight compensation if a bright spot of light, for example a light bulb, causes other areas in the image to appear too dark.

21

Image 21
Contents Axis Q6044-C PTZ Dome Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q6044-C PTZ Dome Network Camera Table of ContentsMulti-Connector Cable Troubleshooting For technical specifications, see Connectors and ButtonsHardware Overview CameraMulti-connector LED IndicatorsPower Button SD Card SlotMedia Converter Switch Connectors Media Converter SwitchNetwork Connector Dip Switches Dip switch positionConnector internal 2-pin I/O terminal block Description Media Converter Switch LED IndicatorsAccess from a Browser Access the ProductAccess from the Internet Set the Root PasswordLive View Go to Setup EventsControls on the Live View Click Use HttpsAxis Media Control viewer toolbar PTZ ControlsTo show the manual trigger buttons in the Live View Axis Q6044-C PTZ Dome Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis Q6044-C PTZ Dome Network Camera Basic Setup Set Up the ProductVideo Video StreamPixel Counter Click Save to apply the new settings Image264 Stream Profiles Camera SettingsImage Settings OverlayGo to Video Video Stream and select the Image tab Overlay Image Use Overlay Text in an Action RuleGo to Video Overlay Image Privacy Mask Start by enabling overlay text in the video streamGo to Events Action Rules Default Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onGo to PTZ Preset Positions Preset PositionsClick Add to save the preset position PTZ Pan Tilt ZoomGatekeeper ConfigurationAutotracking Exclude AreasGuard Tour Max LimitsTo add a guard tour Advanced Osdi ZonesTour Recording LimitsOperator Same as administrator but with lower priority Control QueueControls Axis Q6044-C PTZ Dome Network Camera Detectors Set Up Motion Detection WindowsShock Detection Motion DetectionParameter Object Size History Sensitivity Description Default valuesHigh level 100% Medium level 50%Go to Setup Applications Install ApplicationApplications Application LicensesAxis Q6044-C PTZ Dome Network Camera Events Set Up Action RulesTriggers Go to Events Action Rules and click AddActions Recipient Types Add RecipientsSet Up Email Recipients Set Up RecurrencesCreate Schedules Go to Events Schedules and click AddAxis Q6044-C PTZ Dome Network Camera Recording List RecordingsContinuous Recording Go to Recordings ListLanguages Security System OptionsUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4Smtp email QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card StorageMount and Unmount SD Card Format SD CardPorts & Devices MaintenanceNetwork Share PortsSupport Overview SupportSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsScripting File UploadAxis Q6044-C PTZ Dome Network Camera Function Pin wire Specifications Multi-Connector CableActivated, floating unconnected when Drain, 100 mA Green/white Ethernet receivingUpgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Video Camera Settings Key framesMedia converter switch Storage and disk management problemsStorage disruption Re-mount the storage deviceTechnical Specifications Installation aid Function/group Specifications System ApplicationMaintenance PowerCamera Connectors ConnectorsFunction Pin Specifications External ConnectorsNetwork connector Terminal connectorPerformance Considerations M5.2
Related manuals
Manual 67 pages 21.72 Kb