Axis Communications P5414E Axis Media Control viewer toolbar, Manual Trigger, Go to Setup Events

Page 10

AXIS P5414–E PTZ Dome Network Camera

Accessing the Product

Click the Active/Inactive buttons to manually activate and inactive the product’s output port. For information about how to enable and configure output buttons, see page 25.

The Manual Trigger button is used to trigger an action rule from the Live View page. For information about how to configure and enable the button, see Manual Trigger, on page 10.

Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on your computer. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config > Action Buttons.

The Audio clip drop-down list allows you to play an audio clip from the Live View page. Select the audio clip and click the Play button.

Enable or disable the Gatekeeper by selecting On or Off from the drop-down list. Read more about the Gatekeeper on page 28.

Manual Trigger

The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to validate actions during product installation and configuration.

To configure the manual trigger:

1.Go to Setup > Events.

2.Click Add to add a new action rule.

3.From the Trigger drop-down list, select Input Signal.

4.From the second drop-down list, select Manual Trigger.

5.Select the desired action and configure the other settings as required. For more information about action rules, see Events, on page 35.

To show the manual trigger buttons in the Live View page:

1.Go to Setup > Live View Layout.

2.Under Action Buttons, select Show manual trigger button.

AXIS Media Control viewer toolbar

The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC), on page 13 for more information. The toolbar displays the following buttons:

The Play button connects to the Axis product and starts playing a media stream.

The Stop button stops the media stream.

The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specified in the AMC Control Panel.

10

Image 10
Contents Axis P5414-E PTZ Dome Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P5414-E PTZ Dome Network CameraTechnical Specifications Hardware Overview Connectors and ButtonsNetwork Connector Hardware OverviewLED Indicators Accessing the Product Accessing the ProductAccess from a Browser Live View Accessing the Product Access from the InternetSet the Root Password Controls on the Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger PTZ Controls AMC Audio ControlsAxis P5414-E PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup Video Stream Video and AudioVideo and Audio ImageStream Profiles Camera Settings264 White Balance Exposure SettingsImage Appearance Wide Dynamic RangeDay/Night OverlayGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay Image Using Overlay Text in an Action RuleOverlay Image Go to Events Action RulesAudio Modes Audio SettingsVideo and Audio Privacy Mask Audio InputAudio Clips Audio OutputLive View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsAxis P5414-E PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Focus WindowOsdi Zones PTZ Pan Tilt Zoom GatekeeperGuard Tour Go to PTZ Guard Tour and click AddLimits AdvancedControl Queue ControlsAxis P5414-E PTZ Dome Network Camera Detectors Set Up Motion Detection WindowsDetectors Motion DetectionAudio Detection Motion Detection ParametersApplications Install ApplicationApplications Application LicensesAxis P5414-E PTZ Dome Network Camera Events EventsTime Setting Up an Action RuleSystem PTZ ControlRecipient Use with action RecipientsFallback Action Go to Events Recipients and click AddRecurrences Setting Up an Email RecipientSchedules Go to Events Schedules and click AddGo to Events Recurrences and click Add Recording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersCertificates IeeeGo to System Options Security Ieee Audio Support Date & TimeGo to System Options Security Certificates Basic TCP/IP Settings System Options NetworkDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Video Hosting System AvhsLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 SD Card StorageBonjour Network SharePorts MaintenancePorts & Devices Port StatusSystem Overview SupportSupport Overview Logs & ReportsPlain Config Reset to Factory Default SettingsFile Upload Repainting the Camera Repainting the CameraEmergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Settings Video and image problems, generalSetup Video & Audio Camera Settings Storage and disk management problemsTechnical Specifications Technical SpecificationsMaintenance Function/group Specifications Network SecurityInstallation SupportedConnectors Terminal ConnectorO configured as input O configured as output Performance Considerations Function PinM2.2

P5414E specifications

The Axis Communications P5414E is a high-performance pan-tilt-zoom (PTZ) network camera designed for versatile surveillance applications. Ideal for outdoor environments, this camera combines advanced imaging technology with sophisticated features, catering to the needs of security professionals looking for reliable performance.

One of the standout features of the P5414E is its 720p resolution capability, providing clear and sharp images for effective monitoring. The camera is equipped with a powerful 18x optical zoom, enabling users to zoom in on specific areas without losing image quality. This is particularly useful in scenarios where detailed surveillance is crucial, such as monitoring large open spaces or capturing high-definition images of distant subjects.

The P5414E employs Axis’ streaming technology, allowing for smooth and efficient video transmission over the network. It supports multiple H.264 and Motion JPEG streams, enabling users to customize the stream quality depending on their networking conditions and storage needs. This flexibility is essential for optimizing bandwidth usage while maintaining image fidelity.

For nighttime surveillance, the P5414E incorporates advanced infrared (IR) technology, allowing it to capture high-quality images even in low-light conditions. With a built-in IR illuminator, the camera can provide visibility in complete darkness, ensuring continuous monitoring around the clock.

The camera's rugged design is specifically built to withstand harsh weather conditions. It includes an IP66-rated housing, making it resistant to dust and water ingress, while also operating effectively in a temperature range of -40°C to 50°C (-40°F to 122°F). This durability makes the P5414E suitable for a variety of challenging environments.

In addition to its robust features, the P5414E includes Axis’ advanced analytic functionalities, such as digital auto tracking and motion detection. These features enhance the camera's capability to alert users of suspicious activities in real time, significantly improving the effectiveness of security operations.

Moreover, the camera is equipped with Power over Ethernet (PoE), simplifying installation and reducing the need for multiple cables. This integration of power and data transmission through a single cable not only streamlines setup but also ensures a more efficient and reliable operation.

The Axis Communications P5414E represents the pinnacle of surveillance technology, combining high-resolution video, robust features, and practical design to meet the demands of modern security environments. Its cutting-edge technologies provide users with the tools needed for comprehensive monitoring and effective response to security threats.