Axis Communications P5414E user manual Audio Detection, Motion Detection Parameters

Page 32

AXIS P5414–E PTZ Dome Network Camera

Detectors

Motion Detection Parameters

The parameters controlling motion detection are described in the table below:

Parameter

Object Size

History

Sensitivity

 

 

 

 

Description

Object size relative to window

Object memory length.

Difference in luminance

 

size.

 

between background and

 

 

 

object.

 

 

 

 

High level (100%)

Only very large objects trigger

An object that appears in

Ordinary colored objects on

 

motion detection.

the window triggers motion

ordinary backgrounds trigger

 

 

detection for a long time

motion detection.

 

 

before it is considered as

 

 

 

non-moving.

 

 

 

 

 

Medium level (50%)

 

 

A large difference in luminance

 

 

 

is required to trigger motion

 

 

 

detection.

 

 

 

 

Low level (0%)

Even very small objects trigger

An object that appears in

Only very bright objects on

 

motion detection.

the window triggers motion

a dark background trigger

 

 

detection only for a very short

motion detection.

 

 

time before it is considered as

 

 

 

non-moving.

 

 

 

 

 

Recommended values

5–15%

60–90%

75–95%

 

 

 

 

Default values

15%

90%

90%

 

 

 

 

Note

•To trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size.

•To avoid triggering on small objects, select a high object size.

•While monitoring an area where moving objects are not expected, select a high history level. This will cause motion detection to trigger as long as the object is present in the window.

•To only detect flashing light, select a low sensitivity. In other cases high sensitivity is recommended.

Audio Detection

The Axis product can be configured to generate an alarm when audio rises above or falls below the threshold value. The threshold value can be set in the range 0–100 where 0 is the most sensitive and 100 the least sensitive.

1.Go to Detectors > Audio Detection.

2.Set the audio alarm level and click Save.

3.Go to Events > Action Rules and set up an action rule, see Setting Up an Action Rule, on page 36.

Detected audio is indicated by colored peaks in the Activity indicator. An event is triggered when detected audio rises above or falls below the threshold value, which is represented by the bar.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Axis P5414-E PTZ Dome Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P5414-E PTZ Dome Network CameraTechnical Specifications Connectors and Buttons Network ConnectorHardware Overview Hardware OverviewLED Indicators Access from a Browser Accessing the ProductAccessing the Product Accessing the Product Access from the Internet Set the Root PasswordLive View Controls on the Live ViewManual Trigger Go to Setup EventsAxis Media Control viewer toolbar PTZ Controls AMC Audio ControlsAxis P5414-E PTZ Dome Network Camera How to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Basic Setup Setting Up the ProductSetting Up the Product Video and Audio Video and AudioVideo Stream Image264 Camera SettingsStream Profiles Exposure Settings Image AppearanceWhite Balance Wide Dynamic RangeGo to Video & Audio Video Stream and select the Image tab OverlayDay/Night Using Overlay Text in an Action Rule Overlay ImageGo to Video & Audio Overlay Image Go to Events Action RulesAudio Settings Video and Audio Privacy MaskAudio Modes Audio InputAudio Clips Audio OutputDefault Viewer for Browsers Live View ConfigLive View Config Viewer Settings Go to Setup Live View ConfigUser Defined Links Output ButtonsAxis P5414-E PTZ Dome Network Camera Preset Positions PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Focus WindowPTZ Pan Tilt Zoom Gatekeeper Guard TourOsdi Zones Go to PTZ Guard Tour and click AddAdvanced Control QueueLimits ControlsAxis P5414-E PTZ Dome Network Camera Set Up Motion Detection Windows DetectorsDetectors Motion DetectionAudio Detection Motion Detection ParametersInstall Application ApplicationsApplications Application LicensesAxis P5414-E PTZ Dome Network Camera Events EventsSetting Up an Action Rule SystemTime PTZ ControlRecipients Fallback ActionRecipient Use with action Go to Events Recipients and click AddSetting Up an Email Recipient SchedulesRecurrences Go to Events Schedules and click AddGo to Events Recurrences and click Add Recordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Go to System Options Security Certificates Date & TimeAudio Support Basic TCP/IP Settings System Options NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceDNS Configuration Axis Video Hosting System AvhsNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM Storage BonjourSD Card Network ShareMaintenance Ports & DevicesPorts Port StatusSupport Support OverviewSystem Overview Logs & ReportsFile Upload Reset to Factory Default SettingsPlain Config Repainting the Camera Repainting the CameraTroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, general Setup Video & Audio Camera SettingsSettings Storage and disk management problemsTechnical Specifications Technical SpecificationsFunction/group Specifications Network Security InstallationMaintenance SupportedConnectors Terminal ConnectorO configured as input O configured as output Performance Considerations Function PinM2.2

P5414E specifications

The Axis Communications P5414E is a high-performance pan-tilt-zoom (PTZ) network camera designed for versatile surveillance applications. Ideal for outdoor environments, this camera combines advanced imaging technology with sophisticated features, catering to the needs of security professionals looking for reliable performance.

One of the standout features of the P5414E is its 720p resolution capability, providing clear and sharp images for effective monitoring. The camera is equipped with a powerful 18x optical zoom, enabling users to zoom in on specific areas without losing image quality. This is particularly useful in scenarios where detailed surveillance is crucial, such as monitoring large open spaces or capturing high-definition images of distant subjects.

The P5414E employs Axis’ streaming technology, allowing for smooth and efficient video transmission over the network. It supports multiple H.264 and Motion JPEG streams, enabling users to customize the stream quality depending on their networking conditions and storage needs. This flexibility is essential for optimizing bandwidth usage while maintaining image fidelity.

For nighttime surveillance, the P5414E incorporates advanced infrared (IR) technology, allowing it to capture high-quality images even in low-light conditions. With a built-in IR illuminator, the camera can provide visibility in complete darkness, ensuring continuous monitoring around the clock.

The camera's rugged design is specifically built to withstand harsh weather conditions. It includes an IP66-rated housing, making it resistant to dust and water ingress, while also operating effectively in a temperature range of -40°C to 50°C (-40°F to 122°F). This durability makes the P5414E suitable for a variety of challenging environments.

In addition to its robust features, the P5414E includes Axis’ advanced analytic functionalities, such as digital auto tracking and motion detection. These features enhance the camera's capability to alert users of suspicious activities in real time, significantly improving the effectiveness of security operations.

Moreover, the camera is equipped with Power over Ethernet (PoE), simplifying installation and reducing the need for multiple cables. This integration of power and data transmission through a single cable not only streamlines setup but also ensures a more efficient and reliable operation.

The Axis Communications P5414E represents the pinnacle of surveillance technology, combining high-resolution video, robust features, and practical design to meet the demands of modern security environments. Its cutting-edge technologies provide users with the tools needed for comprehensive monitoring and effective response to security threats.
Top Page Image Contents