Axis Communications P5414E user manual Storage, Bonjour, SD Card, Network Share

Page 50

AXIS P5414–E PTZ Dome Network Camera

System Options

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

Bonjour can be disabled under System Options > Network > Bonjour.

Storage

SD Card

The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card with speed class 10.

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

The Axis product supports SD cards with the following file systems:

•ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

•vFAT — most SD cards are pre-formatted with vFAT when purchased.

If required, the SD card can be manually formatted to the desired file system. To format the SD card:

1.Insert the SD card in the SD card slot.

2.Go to System Options > Storage and click SD Card.

3.Click Format and select the desired file system.

Note

During formatting any previous data stored on the disk will be lost.

Mounting is done automatically when the card is inserted or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1.Go to System Options > Storage and click SD Card.

2.Click Unmount.

3.The card can now be removed.

The SD card is managed on the System Options > Storage page. Click SD Card to open Storage Management.

If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair. This option is only available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.

To avoid filling the card, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the card and protect recordings from being removed, select Lock under Recording Settings.

Network Share

Network share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common Internet File System) and use them for storage of recordings.

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Axis P5414-E PTZ Dome Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P5414-E PTZ Dome Network CameraTechnical Specifications Hardware Overview Connectors and ButtonsNetwork Connector Hardware OverviewLED Indicators Access from a Browser Accessing the ProductAccessing the Product Live View Accessing the Product Access from the InternetSet the Root Password Controls on the Live ViewManual Trigger Go to Setup EventsAxis Media Control viewer toolbar PTZ Controls AMC Audio ControlsAxis P5414-E PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Basic Setup Setting Up the ProductSetting Up the Product Video Stream Video and AudioVideo and Audio Image264 Camera SettingsStream Profiles White Balance Exposure SettingsImage Appearance Wide Dynamic RangeGo to Video & Audio Video Stream and select the Image tab OverlayDay/Night Go to Video & Audio Overlay Image Using Overlay Text in an Action RuleOverlay Image Go to Events Action RulesAudio Modes Audio SettingsVideo and Audio Privacy Mask Audio InputAudio Clips Audio OutputDefault Viewer for Browsers Live View ConfigLive View Config User Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsAxis P5414-E PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Focus WindowOsdi Zones PTZ Pan Tilt Zoom GatekeeperGuard Tour Go to PTZ Guard Tour and click AddLimits AdvancedControl Queue ControlsAxis P5414-E PTZ Dome Network Camera Detectors Set Up Motion Detection WindowsDetectors Motion DetectionAudio Detection Motion Detection ParametersApplications Install ApplicationApplications Application LicensesAxis P5414-E PTZ Dome Network Camera Events EventsTime Setting Up an Action RuleSystem PTZ ControlRecipient Use with action RecipientsFallback Action Go to Events Recipients and click AddRecurrences Setting Up an Email RecipientSchedules Go to Events Schedules and click AddGo to Events Recurrences and click Add Recording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersGo to System Options Security Ieee IeeeCertificates Go to System Options Security Certificates Date & TimeAudio Support Basic TCP/IP Settings System Options NetworkDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Video Hosting System AvhsLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM SD Card StorageBonjour Network SharePorts MaintenancePorts & Devices Port StatusSystem Overview SupportSupport Overview Logs & ReportsFile Upload Reset to Factory Default SettingsPlain Config Repainting the Camera Repainting the CameraEmergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Settings Video and image problems, generalSetup Video & Audio Camera Settings Storage and disk management problemsTechnical Specifications Technical SpecificationsMaintenance Function/group Specifications Network SecurityInstallation SupportedConnectors Terminal ConnectorO configured as input O configured as output Performance Considerations Function PinM2.2

P5414E specifications

The Axis Communications P5414E is a high-performance pan-tilt-zoom (PTZ) network camera designed for versatile surveillance applications. Ideal for outdoor environments, this camera combines advanced imaging technology with sophisticated features, catering to the needs of security professionals looking for reliable performance.

One of the standout features of the P5414E is its 720p resolution capability, providing clear and sharp images for effective monitoring. The camera is equipped with a powerful 18x optical zoom, enabling users to zoom in on specific areas without losing image quality. This is particularly useful in scenarios where detailed surveillance is crucial, such as monitoring large open spaces or capturing high-definition images of distant subjects.

The P5414E employs Axis’ streaming technology, allowing for smooth and efficient video transmission over the network. It supports multiple H.264 and Motion JPEG streams, enabling users to customize the stream quality depending on their networking conditions and storage needs. This flexibility is essential for optimizing bandwidth usage while maintaining image fidelity.

For nighttime surveillance, the P5414E incorporates advanced infrared (IR) technology, allowing it to capture high-quality images even in low-light conditions. With a built-in IR illuminator, the camera can provide visibility in complete darkness, ensuring continuous monitoring around the clock.

The camera's rugged design is specifically built to withstand harsh weather conditions. It includes an IP66-rated housing, making it resistant to dust and water ingress, while also operating effectively in a temperature range of -40°C to 50°C (-40°F to 122°F). This durability makes the P5414E suitable for a variety of challenging environments.

In addition to its robust features, the P5414E includes Axis’ advanced analytic functionalities, such as digital auto tracking and motion detection. These features enhance the camera's capability to alert users of suspicious activities in real time, significantly improving the effectiveness of security operations.

Moreover, the camera is equipped with Power over Ethernet (PoE), simplifying installation and reducing the need for multiple cables. This integration of power and data transmission through a single cable not only streamlines setup but also ensures a more efficient and reliable operation.

The Axis Communications P5414E represents the pinnacle of surveillance technology, combining high-resolution video, robust features, and practical design to meet the demands of modern security environments. Its cutting-edge technologies provide users with the tools needed for comprehensive monitoring and effective response to security threats.
Top Page Image Contents