Axis Communications P5414E user manual System Options Network, Basic TCP/IP Settings

Page 45

AXIS P5414–E PTZ Dome Network Camera

System Options

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version must always be enabled.

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DHCP can update a DNS server. It is then possible to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset the product to the factory default settings (see page 53) and then perform the installation again.

To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.

ARP/Ping

The product’s IP address can be assigned using ARP and Ping. For instructions, see Assign IP Address Using ARP/Ping, on page 45.

The ARP/Ping service is enabled by default but is automatically disabled two minutes after the product is started, or as soon as an IP address is assigned. To re-assign IP address using ARP/Ping, the product must be restarted to enable ARP/Ping for an additional two minutes.

To disable the service, go to System Options > Network > TCP/IP > Basic and clear the option Enable ARP/Ping setting of IP address.

Pinging the product is still possible when the service is disabled.

Assign IP Address Using ARP/Ping

The product's IP address can be assigned using ARP/Ping. The command must be issued within 2 minutes of connecting power.

1.Acquire a free static IP address on the same network segment as the computer.

2.Locate the serial number (S/N) on the product label.

3.Open a command prompt and enter the following commands:

Linux/Unix syntax

arp -s <IP address> <serial number> temp ping -l 408 <IP address>

Linux/Unix example

arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -l 408 192.168.0.125

Windows syntax (this may require that you run the command prompt as an administrator) arp -s <IP address> <serial number>

45

Image 45
Contents Axis P5414-E PTZ Dome Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis P5414-E PTZ Dome Network Camera Table of ContentsTechnical Specifications Network Connector Connectors and ButtonsHardware Overview Hardware OverviewLED Indicators Accessing the Product Accessing the ProductAccess from a Browser Set the Root Password Accessing the Product Access from the InternetLive View Controls on the Live ViewGo to Setup Events Axis Media Control viewer toolbarManual Trigger AMC Audio Controls PTZ ControlsAxis P5414-E PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream ImageCamera Settings Stream Profiles264 Image Appearance Exposure SettingsWhite Balance Wide Dynamic RangeOverlay Day/NightGo to Video & Audio Video Stream and select the Image tab Overlay Image Using Overlay Text in an Action RuleGo to Video & Audio Overlay Image Go to Events Action RulesVideo and Audio Privacy Mask Audio SettingsAudio Modes Audio InputAudio Output Audio ClipsLive View Config Live View ConfigDefault Viewer for Browsers Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsAxis P5414-E PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Focus WindowGuard Tour PTZ Pan Tilt Zoom GatekeeperOsdi Zones Go to PTZ Guard Tour and click AddControl Queue AdvancedLimits ControlsAxis P5414-E PTZ Dome Network Camera Detectors Set Up Motion Detection WindowsDetectors Motion DetectionMotion Detection Parameters Audio DetectionApplications Install ApplicationApplications Application LicensesAxis P5414-E PTZ Dome Network Camera Events EventsSystem Setting Up an Action RuleTime PTZ ControlFallback Action RecipientsRecipient Use with action Go to Events Recipients and click AddSchedules Setting Up an Email RecipientRecurrences Go to Events Schedules and click AddGo to Events Recurrences and click Add Recordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersIeee CertificatesGo to System Options Security Ieee Date & Time Audio SupportGo to System Options Security Certificates System Options Network Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsDNS Configuration Axis Video Hosting System AvhsHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4Smtp email QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 Bonjour StorageSD Card Network SharePorts & Devices MaintenancePorts Port StatusSupport Overview SupportSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigFile Upload Repainting the Camera Repainting the CameraTroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Setup Video & Audio Camera Settings Video and image problems, generalSettings Storage and disk management problemsTechnical Specifications Technical SpecificationsInstallation Function/group Specifications Network SecurityMaintenance SupportedTerminal Connector ConnectorsO configured as input O configured as output Function Pin Performance ConsiderationsM2.2

P5414E specifications

The Axis Communications P5414E is a high-performance pan-tilt-zoom (PTZ) network camera designed for versatile surveillance applications. Ideal for outdoor environments, this camera combines advanced imaging technology with sophisticated features, catering to the needs of security professionals looking for reliable performance.

One of the standout features of the P5414E is its 720p resolution capability, providing clear and sharp images for effective monitoring. The camera is equipped with a powerful 18x optical zoom, enabling users to zoom in on specific areas without losing image quality. This is particularly useful in scenarios where detailed surveillance is crucial, such as monitoring large open spaces or capturing high-definition images of distant subjects.

The P5414E employs Axis’ streaming technology, allowing for smooth and efficient video transmission over the network. It supports multiple H.264 and Motion JPEG streams, enabling users to customize the stream quality depending on their networking conditions and storage needs. This flexibility is essential for optimizing bandwidth usage while maintaining image fidelity.

For nighttime surveillance, the P5414E incorporates advanced infrared (IR) technology, allowing it to capture high-quality images even in low-light conditions. With a built-in IR illuminator, the camera can provide visibility in complete darkness, ensuring continuous monitoring around the clock.

The camera's rugged design is specifically built to withstand harsh weather conditions. It includes an IP66-rated housing, making it resistant to dust and water ingress, while also operating effectively in a temperature range of -40°C to 50°C (-40°F to 122°F). This durability makes the P5414E suitable for a variety of challenging environments.

In addition to its robust features, the P5414E includes Axis’ advanced analytic functionalities, such as digital auto tracking and motion detection. These features enhance the camera's capability to alert users of suspicious activities in real time, significantly improving the effectiveness of security operations.

Moreover, the camera is equipped with Power over Ethernet (PoE), simplifying installation and reducing the need for multiple cables. This integration of power and data transmission through a single cable not only streamlines setup but also ensures a more efficient and reliable operation.

The Axis Communications P5414E represents the pinnacle of surveillance technology, combining high-resolution video, robust features, and practical design to meet the demands of modern security environments. Its cutting-edge technologies provide users with the tools needed for comprehensive monitoring and effective response to security threats.