Axis Communications P5414E user manual Recordings, Recording List, Continuous Recording

Page 40

AXIS P5414–E PTZ Dome Network Camera

Recordings

Recordings

The Axis product can be configured to record video continuously or according to an action rule:

•To start a continuous recording, see page 40.

•To set up action rules, see page 36.

•To access recordings, see Recording List, on page 40.

•To configure camera controlled storage, see Storage, on page 50.

Recording List

Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the event that triggered the recording.

To play or download a recording, follow these steps:

1.Go to Recordings > List.

2.Use the filter to narrow the list of recordings. Enter the desired filter criteria and click Filter. Some filters may take a long time to complete.

3.Select the recording.

4.Click Play to play the recording, or click Download to download the recording.

Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded file is a zip file containing a minimum of three files, of which the Matroska (mkv) files are the actual recordings. The recordings are time-stamped with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter can be downloaded from www.axis.com/techsup/software

For detailed recording and video information, select a recording and click Properties.

To remove a recording, select the recording and click Remove.

Continuous Recording

The Axis product can be configured to continuously save video to a storage device. See Storage, on page 50 for more information about storage devices. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings. If a new stream profile is selected while a recording is ongoing, the recording will be stopped and saved in the recording list and a new recording with the new stream profile will start. All previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings.

To start a continuous recording, follow these steps:

1.Go to Recordings > Continuous.

2.Select Enabled.

3.Select type of storage device from the Disk list.

4.Select a Stream profile to use for continuous recordings.

5.Click Save to save and start the recording.

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Axis P5414-E PTZ Dome Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P5414-E PTZ Dome Network CameraTechnical Specifications Connectors and Buttons Network ConnectorHardware Overview Hardware OverviewLED Indicators Accessing the Product Accessing the ProductAccess from a Browser Accessing the Product Access from the Internet Set the Root PasswordLive View Controls on the Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger PTZ Controls AMC Audio ControlsAxis P5414-E PTZ Dome Network Camera How to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream ImageStream Profiles Camera Settings264 Exposure Settings Image AppearanceWhite Balance Wide Dynamic RangeDay/Night OverlayGo to Video & Audio Video Stream and select the Image tab Using Overlay Text in an Action Rule Overlay ImageGo to Video & Audio Overlay Image Go to Events Action RulesAudio Settings Video and Audio Privacy MaskAudio Modes Audio InputAudio Clips Audio OutputLive View Config Live View ConfigDefault Viewer for Browsers Viewer Settings Go to Setup Live View ConfigUser Defined Links Output ButtonsAxis P5414-E PTZ Dome Network Camera Preset Positions PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Focus WindowPTZ Pan Tilt Zoom Gatekeeper Guard TourOsdi Zones Go to PTZ Guard Tour and click AddAdvanced Control QueueLimits ControlsAxis P5414-E PTZ Dome Network Camera Set Up Motion Detection Windows DetectorsDetectors Motion DetectionAudio Detection Motion Detection ParametersInstall Application ApplicationsApplications Application LicensesAxis P5414-E PTZ Dome Network Camera Events EventsSetting Up an Action Rule SystemTime PTZ ControlRecipients Fallback ActionRecipient Use with action Go to Events Recipients and click AddSetting Up an Email Recipient SchedulesRecurrences Go to Events Schedules and click AddGo to Events Recurrences and click Add Recordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Audio Support Date & TimeGo to System Options Security Certificates Basic TCP/IP Settings System Options NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceDNS Configuration Axis Video Hosting System AvhsNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 Storage BonjourSD Card Network ShareMaintenance Ports & DevicesPorts Port StatusSupport Support OverviewSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsFile Upload Repainting the Camera Repainting the CameraTroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Video and image problems, general Setup Video & Audio Camera SettingsSettings Storage and disk management problemsTechnical Specifications Technical SpecificationsFunction/group Specifications Network Security InstallationMaintenance SupportedConnectors Terminal ConnectorO configured as input O configured as output Performance Considerations Function PinM2.2

P5414E specifications

The Axis Communications P5414E is a high-performance pan-tilt-zoom (PTZ) network camera designed for versatile surveillance applications. Ideal for outdoor environments, this camera combines advanced imaging technology with sophisticated features, catering to the needs of security professionals looking for reliable performance.

One of the standout features of the P5414E is its 720p resolution capability, providing clear and sharp images for effective monitoring. The camera is equipped with a powerful 18x optical zoom, enabling users to zoom in on specific areas without losing image quality. This is particularly useful in scenarios where detailed surveillance is crucial, such as monitoring large open spaces or capturing high-definition images of distant subjects.

The P5414E employs Axis’ streaming technology, allowing for smooth and efficient video transmission over the network. It supports multiple H.264 and Motion JPEG streams, enabling users to customize the stream quality depending on their networking conditions and storage needs. This flexibility is essential for optimizing bandwidth usage while maintaining image fidelity.

For nighttime surveillance, the P5414E incorporates advanced infrared (IR) technology, allowing it to capture high-quality images even in low-light conditions. With a built-in IR illuminator, the camera can provide visibility in complete darkness, ensuring continuous monitoring around the clock.

The camera's rugged design is specifically built to withstand harsh weather conditions. It includes an IP66-rated housing, making it resistant to dust and water ingress, while also operating effectively in a temperature range of -40°C to 50°C (-40°F to 122°F). This durability makes the P5414E suitable for a variety of challenging environments.

In addition to its robust features, the P5414E includes Axis’ advanced analytic functionalities, such as digital auto tracking and motion detection. These features enhance the camera's capability to alert users of suspicious activities in real time, significantly improving the effectiveness of security operations.

Moreover, the camera is equipped with Power over Ethernet (PoE), simplifying installation and reducing the need for multiple cables. This integration of power and data transmission through a single cable not only streamlines setup but also ensures a more efficient and reliable operation.

The Axis Communications P5414E represents the pinnacle of surveillance technology, combining high-resolution video, robust features, and practical design to meet the demands of modern security environments. Its cutting-edge technologies provide users with the tools needed for comprehensive monitoring and effective response to security threats.
Top Page Image Contents