Axis Communications P5414E user manual LED Indicators

Page 7

AXIS P5414–E PTZ Dome Network Camera

Hardware Overview

I/O Connector

Use in applications for e.g. motion detection, event triggering, time lapse recording and alarm notifications. In addition to an auxiliary power and a GND pin, the I/O terminal connector provides the interface to:

Digital output – For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The output will show as active (shown under System Options > Ports & Devices) if the alarm device is activated.

Digital input – An alarm input for connecting devices that can toggle between an open and closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and the input becomes active (shown under System Options > Ports & Devices).

Power Connector

2-pin terminal block for power input. Use a Safety Extra Low Voltage (SELV) compliant limited power source (LPS) with either a rated output power limited to 100 W or a rated output current limited to 5 A.

Audio Connector

4-pin terminal block for audio input and output.

SD Card Slot

An SD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Control Button

The control button is used for:

Resetting the product to factory default settings. See page 53.

Connecting to an AXIS Video Hosting System service. See page 46. To connect, press and hold the button for about 1 second until the Status LED flashes green.

Connecting to AXIS Internet Dynamic DNS Service. See page 46. To connect, press and hold the button for about 3 seconds.

LED Indicators

LED

Color

Indication

 

 

 

Status

Unlit

Connection and normal operation

 

 

 

 

Amber

Steady during startup. Flashes during firmware upgrade.

 

 

 

 

Amber/red

Flashes amber/red if network connection is unavailable or lost.

 

 

 

 

Red

Flashes red for firmware upgrade failure.

 

 

 

 

Green

Shows steady green for 10 seconds for normal operation after restart.

 

 

 

7

Image 7
Contents Axis P5414-E PTZ Dome Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis P5414-E PTZ Dome Network Camera Table of ContentsTechnical Specifications Hardware Overview Connectors and ButtonsNetwork Connector Hardware OverviewLED Indicators Accessing the Product Accessing the ProductAccess from a Browser Controls on the Live View Accessing the Product Access from the InternetSet the Root Password Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger AMC Audio Controls PTZ ControlsAxis P5414-E PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup Image Video and AudioVideo and Audio Video StreamStream Profiles Camera Settings264 Wide Dynamic Range Exposure SettingsImage Appearance White BalanceDay/Night OverlayGo to Video & Audio Video Stream and select the Image tab Go to Events Action Rules Using Overlay Text in an Action RuleOverlay Image Go to Video & Audio Overlay ImageAudio Input Audio SettingsVideo and Audio Privacy Mask Audio ModesAudio Output Audio ClipsLive View Config Live View ConfigDefault Viewer for Browsers Output Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis P5414-E PTZ Dome Network Camera Focus Window Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomGo to PTZ Guard Tour and click Add PTZ Pan Tilt Zoom GatekeeperGuard Tour Osdi ZonesControls AdvancedControl Queue LimitsAxis P5414-E PTZ Dome Network Camera Motion Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Audio DetectionApplication Licenses Install ApplicationApplications ApplicationsAxis P5414-E PTZ Dome Network Camera Events EventsPTZ Control Setting Up an Action RuleSystem TimeGo to Events Recipients and click Add RecipientsFallback Action Recipient Use with actionGo to Events Schedules and click Add Setting Up an Email RecipientSchedules RecurrencesGo to Events Recurrences and click Add Continuous Recording RecordingsRecordings Recording ListLanguages LanguagesUsers System OptionsSystem Options SecurityCertificates IeeeGo to System Options Security Ieee Audio Support Date & TimeGo to System Options Security Certificates System Options Network Basic TCP/IP SettingsAxis Video Hosting System Avhs Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationNAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressSmtp email QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 Network Share StorageBonjour SD CardPort Status MaintenancePorts & Devices PortsLogs & Reports SupportSupport Overview System OverviewPlain Config Reset to Factory Default SettingsFile Upload Repainting the Camera Repainting the CameraChecking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Storage and disk management problems Video and image problems, generalSetup Video & Audio Camera Settings SettingsTechnical Specifications Technical SpecificationsSupported Function/group Specifications Network SecurityInstallation MaintenanceTerminal Connector ConnectorsO configured as input O configured as output Function Pin Performance ConsiderationsM2.2

P5414E specifications

The Axis Communications P5414E is a high-performance pan-tilt-zoom (PTZ) network camera designed for versatile surveillance applications. Ideal for outdoor environments, this camera combines advanced imaging technology with sophisticated features, catering to the needs of security professionals looking for reliable performance.

One of the standout features of the P5414E is its 720p resolution capability, providing clear and sharp images for effective monitoring. The camera is equipped with a powerful 18x optical zoom, enabling users to zoom in on specific areas without losing image quality. This is particularly useful in scenarios where detailed surveillance is crucial, such as monitoring large open spaces or capturing high-definition images of distant subjects.

The P5414E employs Axis’ streaming technology, allowing for smooth and efficient video transmission over the network. It supports multiple H.264 and Motion JPEG streams, enabling users to customize the stream quality depending on their networking conditions and storage needs. This flexibility is essential for optimizing bandwidth usage while maintaining image fidelity.

For nighttime surveillance, the P5414E incorporates advanced infrared (IR) technology, allowing it to capture high-quality images even in low-light conditions. With a built-in IR illuminator, the camera can provide visibility in complete darkness, ensuring continuous monitoring around the clock.

The camera's rugged design is specifically built to withstand harsh weather conditions. It includes an IP66-rated housing, making it resistant to dust and water ingress, while also operating effectively in a temperature range of -40°C to 50°C (-40°F to 122°F). This durability makes the P5414E suitable for a variety of challenging environments.

In addition to its robust features, the P5414E includes Axis’ advanced analytic functionalities, such as digital auto tracking and motion detection. These features enhance the camera's capability to alert users of suspicious activities in real time, significantly improving the effectiveness of security operations.

Moreover, the camera is equipped with Power over Ethernet (PoE), simplifying installation and reducing the need for multiple cables. This integration of power and data transmission through a single cable not only streamlines setup but also ensures a more efficient and reliable operation.

The Axis Communications P5414E represents the pinnacle of surveillance technology, combining high-resolution video, robust features, and practical design to meet the demands of modern security environments. Its cutting-edge technologies provide users with the tools needed for comprehensive monitoring and effective response to security threats.