Axis Communications P3367-VE user manual Audio Settings, Audio Channels

Page 21

AXIS P3367–VE Fixed Dome Network Camera

Video and Audio

3.On the Basic tab, set the zoom level using the slider. The buttons < and > move the zoom position one step in either direction. The buttons << and >> move the zoom position in multiple steps in either direction.

4.Click Perform auto focus to focus the camera automatically.

5.If more adjustments are needed, go to the Advanced tab.

Note

•Changing the zoom level moves the focus position. Focus should always be adjusted after changing the zoom.

•Movements in front of the camera should be avoided during automatic focusing.

The Pixel counter shows the number of pixels in an area of the image and can be used to ensure that the size of the image fulfills certain requirements, for example for face recognition. Use the mouse to move and resize the pixel counter, or enter the number of pixels in the Width and Height fields and click Apply.

On the Advanced tab, focus can be adjusted manually:

1.Click Open iris to open the iris to its maximum position. This gives the smallest depth of field and provides the best conditions for focusing.

2.Focus is set in the Focus window. Use the mouse to move and resize the focus window.

3.Set the zoom level using the slider and click Perform auto focus to focus the camera automatically.

4.Click in the Focus position bar to focus on a desired location. The buttons < and > move the focus position one step in either direction. The buttons << and >> move the focus position in multiple steps in either direction.

5.When satisfied, click Enable iris to enable the iris.

Audio Settings

The audio functionality for each video stream is enabled under Video & Audio > Video Stream > Audio.

Audio Channels

Select the type of audio transmission from the Audio mode: drop-down list (Video & Audio> Audio Settings). The different types are:

Full duplex - Simultaneous two-way audio allowing you to transmit and receive audio (talk and listen) at the same time. There is no echo cancellation; if feedback loops appear, try moving the microphone or the speaker.

Half-duplex - Audio can be transmitted in both directions between the Axis product and the client computer, but only in one direction at a time. You must actively receive sound using the Talk/Listen button visible in the Live View page (see AXIS Media Control viewer toolbar). In Push-To-Talkmode, click and hold the button to speak and release it when done. In Toggle mode, click once to switch between speaking and listening.

The Talk/Listen mode is configured from the Audio tab in the AMC control panel (see AXIS Media Control on page 12),

Simplex - Network Camera speaker only - Audio is transmitted from the client to the Axis product and played by the speaker connected to the product. To send audio, the Talk and Microphone buttons in the AMC toolbar must both be enabled. Click either button to stop audio transmission.

Simplex - Network Camera microphone only - Audio captured by the microphone connected to the Axis product is transmitted from the product to one or more clients.

For more information about these settings, please see the online help .

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Axis P3367-VE Fixed Dome Network Camera Liability About this documentIntellectual Property Rights Equipment ModificationsAxis P3367-VE Fixed Dome Network Camera Table of contentsHardware overview Hardware overviewFunction Pin Specifications ConnectorsLED indicators MaintenanceColor Indication Accessing the product Accessing the productAccess from a browser Start a browser Internet Explorer, Firefox, SafariSet the root password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificateLive View Configure capture modeControls on the Live View Axis Media Control viewer toolbarPTZ Controls AMC Audio controlsSource list Axis P3367-VE Fixed Dome Network Camera Media streams How to stream H.264Media streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative methods of accessing the video streamJava applet supports simplex audio with G.711 encoding Accessing audio streamsSetting up the product Setting up the productBasic Setup Video and Audio Video and AudioVideo Stream Stream Profiles Camera SettingsImage 264Exposure Settings Capture modeImage Appearance White balanceView Areas Iris adjustmentDay/Night Low light priority slider toward low noisePrivacy Mask OverlayFocus & Zoom Overlay imageAudio Settings When satisfied, click Enable iris to enable the irisAudio Channels Audio Clips Audio InputAudio Output Default viewer for browsers Live View ConfigLive View Config User Defined Links Viewer SettingsOutput Buttons Browser Viewer DescriptionGo to PTZ Preset Positions Preset positionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomAdvanced Guard TourControls To add a guard tourDetectors DetectorsCamera Tampering Motion detectionMotion detection parameters Set up motion detectionAudio detection Default valuesLow level 0% Recommended valuesApplications ApplicationsEvents Setting up an Action RuleEvents Status LEDRecipients SchedulesRecurrences Recordings RecordingsRecording List Continuous recordingSystem Options System OptionsSecurity UsersDate & Time IeeeAudio Support Network Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourPorts & Devices MaintenanceNetwork Share PortsSupport Ieee 802.1X settingsSupport Overview System OverviewScripting Reset to factory default settingsFile Upload Plain ConfigAxis P3367-VE Fixed Dome Network Camera Troubleshooting TroubleshootingEmergency recovery procedure Checking the firmwareSymptoms, possible causes and remedial actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are flashing red rapidly Setup Video & Audio Camera Settings Video and image problems, generalProblems uploading files No images displayed on webStorage and disk management problems SettingsMotion Detection triggers unexpectedly No audioTechnical Specifications Technical SpecificationsAlarm actions Alarm triggersInstallation aids Software InstallationPerformance considerations Axis P3367-VE Fixed Dome Network Camera M2.2
Top Page Image Contents