Axis Communications P3367-VE Network, Basic TCP/IP Settings, IPv4 Address Configuration, ARP/Ping

Page 36

AXIS P3367–VE Fixed Dome Network Camera

System Options

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 37.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 37.

•Set manually allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version must always be enabled.

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DCHP can update a DNS server, which when allows you to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset the product to the factory default settings (see page 43) and then perform the installation again.

To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.

ARP/Ping

The IP address can be set using ARP and Ping. For instructions, see the product’s Installation Guide.

ARP/Ping is enabled by default. To disable, uncheck the box under System Options > Network > TCP/IP > Basic.

The ARP/Ping service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.

Pinging the product is still possible when this service is disabled.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Axis P3367-VE Fixed Dome Network Camera About this document LiabilityIntellectual Property Rights Equipment ModificationsTable of contents Axis P3367-VE Fixed Dome Network CameraHardware overview Hardware overviewConnectors Function Pin SpecificationsLED indicators MaintenanceColor Indication Accessing the product Accessing the productAccess from a browser Start a browser Internet Explorer, Firefox, SafariAccess from the Internet Set the root passwordNetwork TCP/IP Advanced Click Create self-signed certificateConfigure capture mode Live ViewControls on the Live View Axis Media Control viewer toolbarPTZ Controls AMC Audio controlsSource list Axis P3367-VE Fixed Dome Network Camera How to stream H.264 Media streamsMedia streams Axis Media Control AMCAlternative methods of accessing the video stream QuickTimeTM. The following paths can be usedAccessing audio streams Java applet supports simplex audio with G.711 encodingSetting up the product Setting up the productBasic Setup Video and Audio Video and AudioVideo Stream Camera Settings Stream ProfilesImage 264Capture mode Exposure SettingsImage Appearance White balanceIris adjustment View AreasDay/Night Low light priority slider toward low noiseOverlay Privacy MaskFocus & Zoom Overlay imageAudio Settings When satisfied, click Enable iris to enable the irisAudio Channels Audio Clips Audio InputAudio Output Default viewer for browsers Live View ConfigLive View Config Viewer Settings User Defined LinksOutput Buttons Browser Viewer DescriptionPreset positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomGuard Tour AdvancedControls To add a guard tourDetectors DetectorsCamera Tampering Motion detectionSet up motion detection Motion detection parametersDefault values Audio detectionLow level 0% Recommended valuesApplications ApplicationsSetting up an Action Rule EventsEvents Status LEDRecipients SchedulesRecurrences Recordings RecordingsRecording List Continuous recordingSystem Options System OptionsSecurity UsersDate & Time IeeeAudio Support Basic TCP/IP Settings NetworkIPv4 Address Configuration IPv6 Address ConfigurationAdvanced TCP/IP Settings Link-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailStorage UPnPTMRTP/H.264 BonjourMaintenance Ports & DevicesNetwork Share PortsIeee 802.1X settings SupportSupport Overview System OverviewReset to factory default settings ScriptingFile Upload Plain ConfigAxis P3367-VE Fixed Dome Network Camera Troubleshooting TroubleshootingEmergency recovery procedure Checking the firmwareSymptoms, possible causes and remedial actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are flashing red rapidly Video and image problems, general Setup Video & Audio Camera SettingsProblems uploading files No images displayed on webSettings Storage and disk management problemsMotion Detection triggers unexpectedly No audioTechnical Specifications Technical SpecificationsAlarm triggers Alarm actionsInstallation aids Software InstallationPerformance considerations Axis P3367-VE Fixed Dome Network Camera M2.2
Top Page Image Contents