Axis Communications P3367-VE user manual LED indicators, Color Indication, Maintenance

Page 6

AXIS P3367–VE Fixed Dome Network Camera

Hardware overview

Digital Input	3	Connect to GND to activate, or leave ﬂoating (unconnected)	0 to +40 V DC
		to deactivate.

Digital Output	4	Internal connection to ground when activated, ﬂoating	Max load =100 mA
		(unconnected) when deactivated. If used with an external	Max voltage = +40 V DC
		relay, a diode must be connected in parallel with the load, for
		protection against voltage transients.

LED indicators

LED	Color	Indication

Network	Green	Steady for connection to a 100 MBit/s network. Flashes for network activity.
	Amber	Steady for connection to a 10 MBit/s network. Flashes for network activity.
	Unlit	No network connection.

Status	Green	Steady green for normal operation.
	Amber	Steady during startup and when restoring settings.
	Red	Slow ﬂash for failed upgrade.

Power	Green	Normal operation.
	Amber	Flashes green/amber during ﬁrmware upgrade.

Note

•The Status LED can be conﬁgured to be unlit during normal operation, or to ﬂash only when the product is accessed. To conﬁgure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

•The Status LED can be conﬁgured to ﬂash while an event is active.

•The Status LED can be conﬁgured to ﬂash for identifying the unit. This can be done under Setup > System Options >

Maintenance.

6

Image 6

Contents Axis P3367-VE Fixed Dome Network Camera Intellectual Property Rights About this documentLiability Equipment ModiﬁcationsTable of contents Axis P3367-VE Fixed Dome Network CameraHardware overview Hardware overviewConnectors Function Pin SpeciﬁcationsLED indicators MaintenanceColor Indication Access from a browser Accessing the productAccessing the product Start a browser Internet Explorer, Firefox, SafariNetwork TCP/IP Advanced Access from the InternetSet the root password Click Create self-signed certiﬁcateControls on the Live View Conﬁgure capture modeLive View Axis Media Control viewer toolbarPTZ Controls AMC Audio controlsSource list Axis P3367-VE Fixed Dome Network Camera Media streams How to stream H.264Media streams Axis Media Control AMCAlternative methods of accessing the video stream QuickTimeTM. The following paths can be usedAccessing audio streams Java applet supports simplex audio with G.711 encodingSetting up the product Setting up the productBasic Setup Video and Audio Video and AudioVideo Stream Image Camera SettingsStream Proﬁles 264Image Appearance Capture modeExposure Settings White balanceDay/Night Iris adjustmentView Areas Low light priority slider toward low noiseFocus & Zoom OverlayPrivacy Mask Overlay imageAudio Settings When satisﬁed, click Enable iris to enable the irisAudio Channels Audio Clips Audio InputAudio Output Default viewer for browsers Live View ConﬁgLive View Conﬁg Output Buttons Viewer SettingsUser Deﬁned Links Browser Viewer DescriptionPTZ Pan Tilt Zoom Preset positionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomControls Guard TourAdvanced To add a guard tourCamera Tampering DetectorsDetectors Motion detectionSet up motion detection Motion detection parametersLow level 0% Default valuesAudio detection Recommended valuesApplications ApplicationsEvents Setting up an Action RuleEvents Status LEDRecipients SchedulesRecurrences Recording List RecordingsRecordings Continuous recordingSecurity System OptionsSystem Options UsersDate & Time IeeeAudio Support IPv4 Address Conﬁguration Basic TCP/IP SettingsNetwork IPv6 Address ConﬁgurationAdvanced TCP/IP Settings Link-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 StorageUPnPTM BonjourNetwork Share MaintenancePorts & Devices PortsSupport Overview Ieee 802.1X settingsSupport System OverviewFile Upload Reset to factory default settingsScripting Plain ConﬁgAxis P3367-VE Fixed Dome Network Camera Emergency recovery procedure TroubleshootingTroubleshooting Checking the ﬁrmwareSymptoms, possible causes and remedial actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are ﬂashing red rapidly Problems uploading ﬁles Video and image problems, generalSetup Video & Audio Camera Settings No images displayed on webMotion Detection triggers unexpectedly SettingsStorage and disk management problems No audioTechnical Speciﬁcations Technical SpeciﬁcationsInstallation aids Alarm triggersAlarm actions Software InstallationPerformance considerations Axis P3367-VE Fixed Dome Network Camera M2.2