Axis Communications P3367-VE user manual Recordings, Recording List, Continuous recording

Page 33

AXIS P3367–VE Fixed Dome Network Camera

Recordings

Recordings

The Axis product can be conﬁgured to record video continuously or according to an action rule:

•To start a continuous recording, see page 33.

•To set up action rules, see page 31.

•To access recordings, see Recording List, on page 33.

•To conﬁgure camera controlled storage, see Storage, on page 40.

Recording List

Recordings made to the SD card and network share are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the event that triggered the recording.

To play or download a continuous recording, follow these steps:

1.Go to Recordings > List.

2.Use the ﬁlter to narrow the list of recordings. Enter the desired ﬁlter criteria and click Filter. Some ﬁlters may take a long time to complete.

3.Select the recording.

4.Click Play to play the recording, or click Download to download the recording.

Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded ﬁle is a zip ﬁle containing a minimum of three ﬁles, of which the Matroska (mkv) ﬁles are the actual recordings. The recordings are time-stamped with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter can be downloaded from www.axis.com/techsup/software

For detailed recording and video information, select a recording and click Properties.

To remove a recording, select the recording and click Remove.

Continuous recording

The Axis product can be conﬁgured to continuously save video to an SD card or network share. To prevent the disk from becoming full, it is recommended to conﬁgure the disk to automatically remove old recordings see Storage, on page 40.

To start a continuous recording, follow these steps:

1.Go to Recordings > Continuous.

2.Select Enabled.

3.Select from the SD card or network share from the Disk list.

4.Select a Stream proﬁle to use for continuous recordings.

5.Click Save to save and start the recording.

Note

An ongoing recording will be restarted and all previous continuous recordings will be removed if a new stream proﬁle is selected.

33

Image 33

Contents Axis P3367-VE Fixed Dome Network Camera Liability About this documentIntellectual Property Rights Equipment ModiﬁcationsAxis P3367-VE Fixed Dome Network Camera Table of contentsHardware overview Hardware overviewFunction Pin Speciﬁcations ConnectorsLED indicators MaintenanceColor Indication Accessing the product Accessing the productAccess from a browser Start a browser Internet Explorer, Firefox, SafariSet the root password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certiﬁcateLive View Conﬁgure capture modeControls on the Live View Axis Media Control viewer toolbarPTZ Controls AMC Audio controlsSource list Axis P3367-VE Fixed Dome Network Camera Media streams How to stream H.264Media streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative methods of accessing the video streamJava applet supports simplex audio with G.711 encoding Accessing audio streamsSetting up the product Setting up the productBasic Setup Video and Audio Video and AudioVideo Stream Stream Proﬁles Camera SettingsImage 264Exposure Settings Capture modeImage Appearance White balanceView Areas Iris adjustmentDay/Night Low light priority slider toward low noisePrivacy Mask OverlayFocus & Zoom Overlay imageAudio Settings When satisﬁed, click Enable iris to enable the irisAudio Channels Audio Clips Audio InputAudio Output Default viewer for browsers Live View ConﬁgLive View Conﬁg User Deﬁned Links Viewer SettingsOutput Buttons Browser Viewer DescriptionGo to PTZ Preset Positions Preset positionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomAdvanced Guard TourControls To add a guard tourDetectors DetectorsCamera Tampering Motion detectionMotion detection parameters Set up motion detectionAudio detection Default valuesLow level 0% Recommended valuesApplications ApplicationsEvents Setting up an Action RuleEvents Status LEDRecipients SchedulesRecurrences Recordings RecordingsRecording List Continuous recordingSystem Options System OptionsSecurity UsersDate & Time IeeeAudio Support Network Basic TCP/IP SettingsIPv4 Address Conﬁguration IPv6 Address ConﬁgurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourPorts & Devices MaintenanceNetwork Share PortsSupport Ieee 802.1X settingsSupport Overview System OverviewScripting Reset to factory default settingsFile Upload Plain ConﬁgAxis P3367-VE Fixed Dome Network Camera Troubleshooting TroubleshootingEmergency recovery procedure Checking the ﬁrmwareSymptoms, possible causes and remedial actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are ﬂashing red rapidly Setup Video & Audio Camera Settings Video and image problems, generalProblems uploading ﬁles No images displayed on webStorage and disk management problems SettingsMotion Detection triggers unexpectedly No audioTechnical Speciﬁcations Technical SpeciﬁcationsAlarm actions Alarm triggersInstallation aids Software InstallationPerformance considerations Axis P3367-VE Fixed Dome Network Camera M2.2