Axis Communications P3367-VE user manual Events, Setting up an Action Rule, Status LED

Page 31

AXIS P3367–VE Fixed Dome Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule. The action rule will apply at specific periods called Schedules. It is possible to specify how often the action rule will recur. This is called Recurrences.

Available Action Rule triggers include:

•Detectors, for example audio detection and motion detection

•Hardware — if the temperature falls outside the operating range of the product

•Input Signal — when the product’s I/O port receives a signal from an external device, such as a smoke detector or switch

•PTZ — when the product’s pan/tilt/zoom controls are activated or when the view stops at a preset position

•Storage — when a storage device is available, locked or full

•System — when the product is started

•Time, see Recurrences, on page 32

Possible actions include:

•Day/Night Vision Mode

•Output Port — activate an output to, for example, sound an alarm or lock a door

•Play Audio Clip

•PTZ Control

•Record Video — record video and save to a selected storage

•Send Images and Notifications — once recipients have been set up, a notification can be sent that an event has occurred

•Status LED

Setting up an Action Rule

An action rule defines the conditions that must be met for the product to perform an action, for example record video or send email notifications. If multiple conditions are defined, all must be met to trigger the action.

The following example describes how to set up an action rule to send an email if there is movement in the product’s field of view:

1.Go to Events > Action Rules and click Add.

2.Select the Enable rule option and enter a descriptive name for the rule.

3.Select Detectors from the Trigger drop-down list.

4.Select Motion Detection from the drop-down list.

5.Set one of the available pre-programmed time intervals from the Schedule drop-down list.

6.Select Send Notification from the Type drop-down list.

7.Select where to send the notification from the Recipient drop-down list.

To add additional criteria, select the Additional conditions option. Add and select the desired options as described above.

To copy, modify or remove an action rule, select the action rule in the Action Rule List and click Copy, Modify or Remove.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Axis P3367-VE Fixed Dome Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsAxis P3367-VE Fixed Dome Network Camera Table of contentsHardware overview Hardware overviewFunction Pin Specifications ConnectorsMaintenance LED indicatorsColor Indication Start a browser Internet Explorer, Firefox, Safari Accessing the productAccessing the product Access from a browserClick Create self-signed certificate Access from the InternetSet the root password Network TCP/IP AdvancedAxis Media Control viewer toolbar Configure capture modeLive View Controls on the Live ViewAMC Audio controls PTZ ControlsSource list Axis P3367-VE Fixed Dome Network Camera Axis Media Control AMC How to stream H.264Media streams Media streamsQuickTimeTM. The following paths can be used Alternative methods of accessing the video streamJava applet supports simplex audio with G.711 encoding Accessing audio streamsSetting up the product Setting up the productBasic Setup Video and Audio Video and AudioVideo Stream 264 Camera SettingsStream Profiles ImageWhite balance Capture modeExposure Settings Image AppearanceLow light priority slider toward low noise Iris adjustmentView Areas Day/NightOverlay image OverlayPrivacy Mask Focus & ZoomWhen satisfied, click Enable iris to enable the iris Audio SettingsAudio Channels Audio Input Audio ClipsAudio Output Live View Config Default viewer for browsersLive View Config Browser Viewer Description Viewer SettingsUser Defined Links Output ButtonsPTZ Pan Tilt Zoom Preset positionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomTo add a guard tour Guard TourAdvanced ControlsMotion detection DetectorsDetectors Camera TamperingMotion detection parameters Set up motion detectionRecommended values Default valuesAudio detection Low level 0%Applications ApplicationsStatus LED Setting up an Action RuleEvents EventsSchedules RecipientsRecurrences Continuous recording RecordingsRecordings Recording ListUsers System OptionsSystem Options SecurityIeee Date & TimeAudio Support IPv6 Address Configuration Basic TCP/IP SettingsNetwork IPv4 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Ports MaintenancePorts & Devices Network ShareSystem Overview Ieee 802.1X settingsSupport Support OverviewPlain Config Reset to factory default settingsScripting File UploadAxis P3367-VE Fixed Dome Network Camera Checking the firmware TroubleshootingTroubleshooting Emergency recovery procedureProblems setting the IP address Symptoms, possible causes and remedial actionsProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly No images displayed on web Video and image problems, generalSetup Video & Audio Camera Settings Problems uploading filesNo audio SettingsStorage and disk management problems Motion Detection triggers unexpectedlyTechnical Specifications Technical SpecificationsSoftware Installation Alarm triggersAlarm actions Installation aidsPerformance considerations Axis P3367-VE Fixed Dome Network Camera M2.2
Top Page Image Contents