Axis Communications P3367VE Live View, Set Power Line Frequency, Configure Capture Mode

Page 11

AXIS P3367–VE Fixed Dome Network Camera

Access the Product

Set Power Line Frequency

Power line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 59) or by resetting the product to factory default.

Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause image flicker if the product is used in fluorescent light environments.

When using 50 Hz, the maximum frame rate is limited to 25 fps.

Note

Power line frequency varies depending on geographic region. The Americas usually use 60 Hz, whereas most other parts of the world use 50 Hz. Local variations could apply. Always check with the local authorities.

Configure Capture Mode

Capture mode defines the maximum resolution and maximum frame rate available in the Axis product. The capture mode setting also affects the camera’s angle of view.

Select the desired capture mode from the drop-down list and click OK.

See also Capture Mode on page 20.

The Live View Page

The controls and layout of the Live View page may have been customized to meet specific installation requirements and user preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View page. The following provides an overview of each available control.

Controls on the Live View Page

Click the View size buttons to show the image in full size (right button) or to scale down the image to fit the browser window (left button).

Select a stream profile for the Live View page from the Stream Profile drop-down list. For information about how to configure stream profiles, see page 20.

Click Pulse to activate the product’s output port for a defined period of time. For information about how to enable and configure output buttons, see page 29.

Click the Active/Inactive buttons to manually activate and inactive the product’s output port. For information about how to enable and configure output buttons, see page 29.

The Manual Trigger button is used to trigger an action rule from the Live View page. For information about how to configure and enable the button, see Manual Trigger on page 12.

Click Snapshot to save a snapshot of the video image. This button is primarily intended for use when the

AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config > Action Buttons.

The Audio clip drop-down list allows you to play an audio clip from the Live View page. Select the audio clip and click the Play button.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Axis P3367-VE Fixed Dome Network Camera Intellectual Property Rights About this documentLegal Considerations LiabilityLearn More SupportAxis P3367-VE Fixed Dome Network Camera Table of ContentsConnectors Performance Considerations Hardware Overview Connectors and Buttons Color Indication LED IndicatorsStart a browser Internet Explorer, Firefox, Safari Access the ProductAccess from a Browser Click Use Https Access from the InternetSet the Root Password Controls on the Live View Set Power Line FrequencyConfigure Capture Mode Live ViewTo show the manual trigger buttons in the Live View Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerSpeaker button Click to turn the speakers on or off PTZ ControlsAxis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductVideo Stream Video and Audio264 Click Save to apply the new settingsPixel Counter ImageStream Profiles Camera SettingsCapture Mode Wide Dynamic Range Go to Setup Video & Audio Camera SettingsImage Appearance White BalanceSet Shutter to Exposure SettingsIris adjustment Shutter & GainDay/Night Select an Aspect ratio and a Video stream resolutionView Area OverlayGo to Video & Audio Overlay Image To enable overlaysOverlay Image Go to Video & Audio Video Stream and select the Image tabGo to Events Action Rules Privacy MaskFocus & Zoom Use Overlay Text in an Action RuleAudio Input Audio SettingsWhen satisfied, click Enable iris to enable the iris Audio ModesAudio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewOutput Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis P3367-VE Fixed Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions To add a guard tour Guard TourAdvanced ControlsControl Queue Operator Same as administrator but with lower priorityGo to Detectors Camera Tampering DetectorsCamera Tampering Motion DetectionParameter Object Size History Sensitivity Description Set Up Motion Detection WindowsMotion Detection Parameters Go to Detectors Motion DetectionAudio Detection Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis P3367-VE Fixed Dome Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents TriggersSystem Input SignalHardware StoragePTZ Control Add RecipientsActions Recipient TypesRecipient Use with action Set Up Email RecipientsGo to Events Schedules and click Add Set Up RecurrencesCreate Schedules To create a new scheduleGo to Recordings List RecordingsFind Recordings Play RecordingGo to Recordings Continuous Export Video ClipContinuous Recording To play a recording, follow these stepsLanguages IP Address Filter System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Date & Time To install a self-signed certificateGo to Setup System Options Security Certificates Click Install certificate and upload the certificateNetwork Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM Mount and Unmount SD Card StorageBonjour SD CardGo to System Options Storage Click Network Share Under General Settings, select Autoformat toNetwork Share To add a network shareSupport MaintenancePorts & Devices File Upload System OverviewLogs & Reports ScriptingPlain Config Reset to Factory Default SettingsCheck the Firmware TroubleshootingUpgrade the Firmware Firmware To upgrade the product’s firmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsEmergency Recovery Procedure Problems setting the IP addressBasic Product is accessible locally but not externallyProblems with streaming H.264 Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsFocus, zoom, and fan Storage and disk management problemsTechnical Specifications Audio Function/group Specifications UsersInstallation aids Audio Audio streamingConnectors Function/group Specifications InstallationMaintenance General Casing PowerFunction Pin Specifications ConnectorsFunction/group Specifications Video Software not Included Warranty OptionalOutput Performance ConsiderationsAudio Input Axis P3367-VE Fixed Dome Network Camera M4.2
Top Page Image Contents