Axis Communications P3367VE Privacy Mask, Focus & Zoom, Use Overlay Text in an Action Rule

Page 25

AXIS P3367–VE Fixed Dome Network Camera

Video and Audio

3.To control the image’s position, enter the X and Y coordinates. The X=0 and Y=0 position is the top left corner. If a part of the image is positioned outside the video image, the overlay image will be moved so that the whole image is visible.

4.Click Save.

Use Overlay Text in an Action Rule

Action rules, see page 39, can display an overlay text when the rule is triggered. The text can be used to provide information for forensic video analysis, notify surveillance operators or validate triggers and actions during product installation and configuration.

To display overlay text when an action rule is triggered, the modifier #D should be used as described below. When the rule is triggered, #D will be replaced by the text specified in the action rule.

Start by enabling overlay text in the video stream:

1.Go to Video & Audio > Video Stream and select the Image tab.

2.Under Overlay Settings, select Include text.

3.Enter the modifier #D and, optionally, additional text which will be displayed also when the action rule is not active. Create the action rule:

1.Go to Events > Action Rules

2.Click Add to create a new rule.

3.Select a Trigger and, optionally, a Schedule and Additional conditions. See the online help for details.

4.From the Actions list, select Overlay Text

5.Enter the text to display in the Text field. This is the text that #D will be replaced by.

6.Specify the Duration. The text can be displayed while the rule is active or for a fixed number of seconds.

Example

To display the text “Motion detected” when motion is detected, enter #D in the Include text field and enter “Motion detected” in the Text field when setting up the action rule.

Note

To display text in multiple view areas, overlay text must be enabled in each view area.

Privacy Mask

A privacy mask is a user-defined area that prevent users from viewing parts of the monitored area. Privacy masks appear as blocks of solid color and are applied on the video stream. Privacy masks cannot be bypassed using the VAPIX® application programming interface (API).

The Privacy Mask List (Video & Audio > Privacy Mask) shows all the masks that are currently configured in the Axis product and indicates if they are enabled.

You can add a new mask, re-size the mask with the mouse, choose a color for the mask, and give the mask a name.

For more information, see the online help

Important

Adding many privacy masks may affect the product’s performance.

Focus & Zoom

Focus and zoom should only be configured when installing or reinstalling the product.

25

Image 25
Contents Axis P3367-VE Fixed Dome Network Camera Legal Considerations About this documentLiability Intellectual Property RightsLearn More SupportAxis P3367-VE Fixed Dome Network Camera Table of ContentsConnectors Performance Considerations Hardware Overview Connectors and Buttons Color Indication LED IndicatorsAccess from a Browser Access the ProductStart a browser Internet Explorer, Firefox, Safari Set the Root Password Access from the InternetClick Use Https Configure Capture Mode Set Power Line FrequencyLive View Controls on the Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewSpeaker button Click to turn the speakers on or off PTZ ControlsMedia Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductVideo Stream Video and AudioPixel Counter Click Save to apply the new settingsImage 264Capture Mode Camera SettingsStream Profiles Image Appearance Go to Setup Video & Audio Camera SettingsWhite Balance Wide Dynamic RangeIris adjustment Exposure SettingsShutter & Gain Set Shutter toView Area Select an Aspect ratio and a Video stream resolutionOverlay Day/NightOverlay Image To enable overlaysGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImageFocus & Zoom Privacy MaskUse Overlay Text in an Action Rule Go to Events Action RulesWhen satisfied, click Enable iris to enable the iris Audio SettingsAudio Modes Audio InputAudio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewGo to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsAxis P3367-VE Fixed Dome Network Camera Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Advanced Guard TourControls To add a guard tourControl Queue Operator Same as administrator but with lower priorityCamera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionAudio Detection Go to Setup Applications Install ApplicationApplications Application LicensesAxis P3367-VE Fixed Dome Network Camera Events Set Up Action RulesTriggers Go to Events Action Rules and click AddHardware Input SignalStorage SystemActions Add RecipientsRecipient Types PTZ ControlRecipient Use with action Set Up Email RecipientsCreate Schedules Set Up RecurrencesTo create a new schedule Go to Events Schedules and click AddFind Recordings RecordingsPlay Recording Go to Recordings ListContinuous Recording Export Video ClipTo play a recording, follow these steps Go to Recordings ContinuousLanguages Security System OptionsUsers IP Address FilterCertificates IeeeGo to System Options Security Ieee Go to Setup System Options Security Certificates To install a self-signed certificateClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 Bonjour StorageSD Card Mount and Unmount SD CardNetwork Share Under General Settings, select Autoformat toTo add a network share Go to System Options Storage Click Network SharePorts & Devices MaintenanceSupport Logs & Reports System OverviewScripting File UploadPlain Config Reset to Factory Default SettingsUpgrade the Firmware TroubleshootingFirmware To upgrade the product’s firmware Check the FirmwareEmergency Recovery Procedure Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserProblems with streaming H.264 Product is accessible locally but not externallyBasic Video and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings SettingsFocus, zoom, and fan Storage and disk management problemsTechnical Specifications Installation aids Function/group Specifications UsersAudio Audio streaming AudioMaintenance General Casing Function/group Specifications InstallationPower ConnectorsFunction/group Specifications Video ConnectorsSoftware not Included Warranty Optional Function Pin SpecificationsAudio Input Performance ConsiderationsOutput Axis P3367-VE Fixed Dome Network Camera M4.2