Axis Communications P3367VE user manual Audio Settings, Audio Modes, Audio Input

Page 26

AXIS P3367–VE Fixed Dome Network Camera

Video and Audio

For installation instructions, refer to the product’s Installation Guide.

To set focus and zoom:

1.Install the camera as described in the Installation Guide.

2.Go to Video & Audio > Focus & Zoom.

3.On the Basic tab, set the zoom level using the slider. The buttons < and > move the zoom position one step in either direction. The buttons << and >> move the zoom position in multiple steps in either direction.

4.Click Perform auto focus to focus the camera automatically.

5.If more adjustments are needed, go to the Advanced tab.

Note

•Changing the zoom level moves the focus position. Focus should always be adjusted after changing the zoom.

•Movements in front of the camera should be avoided during automatic focusing.

On the Advanced tab, focus can be adjusted manually:

1.Click Open iris to open the iris to its maximum position. This gives the smallest depth of field and provides the best conditions for focusing.

2.Focus is set in the Focus window. Use the mouse to move and resize the focus window.

3.Click in the Focus position bar to focus on a desired location. The buttons < and > move the focus position one step in either direction. The buttons << and >> move the focus position in multiple steps in either direction.

4.When satisfied, click Enable iris to enable the iris.

Audio Settings

The audio functionality for each video stream is enabled under Video & Audio > Video Stream > Audio.

Audio Modes

The Axis product supports the following audio modes:

Full duplex - Simultaneous two-way audio allowing the Axis product to transmit and receive audio at the same time. There is no echo cancellation; if feedback loops appear, try moving the microphone or the speaker.

Half-duplex - Audio can be transmitted to and from the Axis product but only in one direction at a time. To transmit audio using the Live View page, use the Talk and Listen buttons, see AMC Audio Controls on page 12.

Simplex — speaker only - Audio is transmitted from a client to the Axis product and can be played by a speaker connected to the product. To transmit audio using the Live View page, the Talk and Microphone buttons must both be active, see AMC Audio Controls on page 12.

Simplex — microphone only - Audio captured by the product microphone is transmitted from the Axis product to one or more clients.

To set the audio mode, go to Video & Audio > Audio Settings and select the desired mode from the Audio mode drop-down list.

Audio Input

An external microphone or a line source can be connected to the Audio-in connector. Configure the audio input settings under Video & Audio > Audio Settings.

Select Microphone to use an external microphone or Line to use a Line in device, e.g. an audio mixer for multiple microphones or a microphone with a built-in amplifier , as audio source.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Axis P3367-VE Fixed Dome Network Camera Liability About this documentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3367-VE Fixed Dome Network CameraConnectors Performance Considerations Hardware Overview Connectors and Buttons LED Indicators Color IndicationStart a browser Internet Explorer, Firefox, Safari Access the ProductAccess from a Browser Click Use Https Access from the InternetSet the Root Password Live View Set Power Line FrequencyConfigure Capture Mode Controls on the Live ViewManual Trigger Go to Setup EventsAxis Media Control viewer toolbar To show the manual trigger buttons in the Live ViewPTZ Controls Speaker button Click to turn the speakers on or offAxis Media Control AMC How to Stream H.264Media Streams Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupVideo and Audio Video StreamImage Click Save to apply the new settingsPixel Counter 264Stream Profiles Camera SettingsCapture Mode White Balance Go to Setup Video & Audio Camera SettingsImage Appearance Wide Dynamic RangeShutter & Gain Exposure SettingsIris adjustment Set Shutter toOverlay Select an Aspect ratio and a Video stream resolutionView Area Day/NightGo to Video & Audio Video Stream and select the Image tab To enable overlaysOverlay Image Go to Video & Audio Overlay ImageUse Overlay Text in an Action Rule Privacy MaskFocus & Zoom Go to Events Action RulesAudio Modes Audio SettingsWhen satisfied, click Enable iris to enable the iris Audio InputAudio Clips Audio OutputConfigure the Live View Default Viewer for BrowsersUser Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsAxis P3367-VE Fixed Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions Controls Guard TourAdvanced To add a guard tourOperator Same as administrator but with lower priority Control QueueMotion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingGo to Detectors Motion Detection Set Up Motion Detection WindowsMotion Detection Parameters Parameter Object Size History Sensitivity DescriptionAudio Detection Applications Install ApplicationGo to Setup Applications Application LicensesAxis P3367-VE Fixed Dome Network Camera Triggers Set Up Action RulesEvents Go to Events Action Rules and click AddStorage Input SignalHardware SystemRecipient Types Add RecipientsActions PTZ ControlSet Up Email Recipients Recipient Use with actionTo create a new schedule Set Up RecurrencesCreate Schedules Go to Events Schedules and click AddPlay Recording RecordingsFind Recordings Go to Recordings ListTo play a recording, follow these steps Export Video ClipContinuous Recording Go to Recordings ContinuousLanguages Users System OptionsSecurity IP Address FilterGo to System Options Security Ieee IeeeCertificates Click Install certificate and upload the certificate To install a self-signed certificateGo to Setup System Options Security Certificates Date & TimeBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM SD Card StorageBonjour Mount and Unmount SD CardTo add a network share Under General Settings, select Autoformat toNetwork Share Go to System Options Storage Click Network ShareSupport MaintenancePorts & Devices Scripting System OverviewLogs & Reports File UploadReset to Factory Default Settings Plain ConfigFirmware To upgrade the product’s firmware TroubleshootingUpgrade the Firmware Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsEmergency Recovery Procedure Product cannot be accessed from a browserBasic Product is accessible locally but not externallyProblems with streaming H.264 Setup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general SettingsStorage and disk management problems Focus, zoom, and fanTechnical Specifications Audio Audio streaming Function/group Specifications UsersInstallation aids AudioPower Function/group Specifications InstallationMaintenance General Casing ConnectorsSoftware not Included Warranty Optional ConnectorsFunction/group Specifications Video Function Pin SpecificationsOutput Performance ConsiderationsAudio Input Axis P3367-VE Fixed Dome Network Camera M4.2
Top Page Image Contents