Axis Communications P3367VE user manual Find Recordings, Play Recording, Go to Recordings List

Page 44

AXIS P3367–VE Fixed Dome Network Camera

Recordings

Recordings

The Axis product can be configured to record video continuously or according to an action rule:

•To start a continuous recording, see page 45.

•To set up action rules, see page 39.

•To access recordings, see Find Recordings on page 44.

•To play recordings, see Play Recording on page 44.

•To export a recording as a video clip, see Export Video Clip on page 45.

•To configure camera controlled storage, see Storage on page 55.

Find Recordings

Recordings stored on the SD card or network share can be accessed from the Recordings > List page. The page lists all recordings on the storage device and shows each recording’s start date and time, duration and the event that triggered the recording.

Note

The recording’s start date and time is set according to the Axis product’s date and time settings. If the Axis product is configured to use a time zone different from the local time zone, make sure to configure the Recording time filters according to the product’s time zone. Date and time settings are configured under System Options > Date & Time, see Date & Time on page 49.

To find a recording, follow these steps:

1.Go to Recordings > List.

2.To reduce the number of recordings displayed, select the desired options under Filter: Recording time — List recordings that started between the From and To times.

Event — List recordings that were triggered by a specific event. Select continuous to list continuous recordings. Storage — List recordings from a specific storage device.

Sort — Specify how recordings should be sorted in the list. Results — Specify the maximum number of recordings to display.

3.To apply the filters, click the Filter button. Some filters may take a long time to complete.

4.The recordings are displayed in the Recording list.

To play a recording, select the recording and click Play. See also Play Recording on page 44.

To view detailed information about a recording, select the recording and click Properties.

To export a recording or a part of a recording as a video clip, select the recording and click Export. See also Export Video Clip on page 45.

To remove a recording from the storage device, select the recording and click Remove.

Play Recording

Recordings on the SD card or network share can be played directly from the Axis product’s webpages.

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Axis P3367-VE Fixed Dome Network Camera About this document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3367-VE Fixed Dome Network CameraConnectors Performance Considerations Hardware Overview Connectors and Buttons LED Indicators Color IndicationStart a browser Internet Explorer, Firefox, Safari Access the ProductAccess from a Browser Click Use Https Access from the InternetSet the Root Password Set Power Line Frequency Configure Capture ModeLive View Controls on the Live ViewGo to Setup Events Axis Media Control viewer toolbarManual Trigger To show the manual trigger buttons in the Live ViewPTZ Controls Speaker button Click to turn the speakers on or offAxis Media Control AMC How to Stream H.264Media Streams Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupVideo and Audio Video StreamClick Save to apply the new settings Pixel CounterImage 264Stream Profiles Camera SettingsCapture Mode Go to Setup Video & Audio Camera Settings Image AppearanceWhite Balance Wide Dynamic RangeExposure Settings Iris adjustmentShutter & Gain Set Shutter toSelect an Aspect ratio and a Video stream resolution View AreaOverlay Day/NightTo enable overlays Overlay ImageGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay ImagePrivacy Mask Focus & ZoomUse Overlay Text in an Action Rule Go to Events Action RulesAudio Settings When satisfied, click Enable iris to enable the irisAudio Modes Audio InputAudio Clips Audio OutputConfigure the Live View Default Viewer for BrowsersViewer Settings Go to Setup Live View ConfigUser Defined Links Output ButtonsAxis P3367-VE Fixed Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions Guard Tour AdvancedControls To add a guard tourOperator Same as administrator but with lower priority Control QueueDetectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionAudio Detection Install Application Go to Setup ApplicationsApplications Application LicensesAxis P3367-VE Fixed Dome Network Camera Set Up Action Rules EventsTriggers Go to Events Action Rules and click AddInput Signal HardwareStorage SystemAdd Recipients ActionsRecipient Types PTZ ControlSet Up Email Recipients Recipient Use with actionSet Up Recurrences Create SchedulesTo create a new schedule Go to Events Schedules and click AddRecordings Find RecordingsPlay Recording Go to Recordings ListExport Video Clip Continuous RecordingTo play a recording, follow these steps Go to Recordings ContinuousLanguages System Options SecurityUsers IP Address FilterGo to System Options Security Ieee IeeeCertificates To install a self-signed certificate Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Date & TimeBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM Storage BonjourSD Card Mount and Unmount SD CardUnder General Settings, select Autoformat to Network ShareTo add a network share Go to System Options Storage Click Network ShareSupport MaintenancePorts & Devices System Overview Logs & ReportsScripting File UploadReset to Factory Default Settings Plain ConfigTroubleshooting Upgrade the FirmwareFirmware To upgrade the product’s firmware Check the FirmwareSymptoms, Possible Causes and Remedial Actions Emergency Recovery ProcedureProblems setting the IP address Product cannot be accessed from a browserBasic Product is accessible locally but not externallyProblems with streaming H.264 Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalSetup Video & Audio Camera Settings SettingsStorage and disk management problems Focus, zoom, and fanTechnical Specifications Function/group Specifications Users Installation aidsAudio Audio streaming AudioFunction/group Specifications Installation Maintenance General CasingPower ConnectorsConnectors Function/group Specifications VideoSoftware not Included Warranty Optional Function Pin SpecificationsOutput Performance ConsiderationsAudio Input Axis P3367-VE Fixed Dome Network Camera M4.2
Top Page Image Contents