Bosch Appliances VG4-200, VG4-300 Common AutoDome User Commands unlocked, Setting AutoPan Mode

Page 27

AutoDome Modular Camera SystemCommon AutoDome User Commands (unlocked) en 23

3

Common AutoDome User Commands (unlocked)

 

This chapter details the commonly used BOSCH keyboard setup commands. See

 

Section 6: Keyboard Commands by Number on page 33 for a complete list of commands.

3.1

Setting AutoPan Mode

 

AutoPan mode pans a PTZ camera 360º or pans between user defined limits (when pro-

 

grammed). The PTZ camera continues to pan until stopped by moving the joystick.

To pan 360º:

1.Press ON-1-ENTER.

2.Move the joystick to stop the pan.

To set left and right pan limits:

1.Move the camera to the starting position and press SET-101-ENTERto set the left limit.

2.Move the camera to the end position and press SET-102-ENTERto set right limit.

To start Auto-pan between limits:

1. Press ON-2-ENTER.

2. Move the joystick to stop the pan.

3.2 Setting Preset Shots

Preset shots are saved camera positions. Shots are saved as scenes, therefore, the terms SHOT and SCENE are used interchangeably.

To set a Shot:

1.Move the camera to the position you want to save.

2.Press SHOT-#-ENTERwhere # can be a number from 1 to 99 that identifies the camera position of the scene. (shots 1-64 for a 200 Series AutoDome.)

To view a Shot:

XPress SHOT-#-ENTERwhere # is the number of the scene position you want to view.

To store or clear a Shot:

1. Press SET-100-ENTER to access the Store/Clear Scene Menu.

2. Follow the on-screen instructions.

3.3 Configuring Preposition Tours

A Preposition Tour automatically moves the camera through a series of preset or saved shots. There are two (2) types of tours: a standard serial tour and a customized tour.

Tour 1 is a standard tour that moves the camera through a series of shots in the sequence they were set. Tour 2 is a custom tour that allows you to change the sequence of shots in the tour by inserting and deleting scenes.

To start standard Tour 1:

1.Set a series of preset shots in the order that you want the AutoDome to cycle through.

2.Press ON-8-ENTERto start the tour. The tour then cycles through the series of shots until it is stopped.

To stop a Tour:

XPress OFF-8-ENTERor move the joystick to stop either type of tour.

Bosch Security Systems, Inc.

VG4-200, VG4-300, VG4-500i Series User’s Manual

F01U064036 1.0 2007.01

Image 27
Contents AutoDome Modular Camera System Page Document Conventions SymbolsPreface AudienceRelated Publications Customer Support and ServiceTable of Contents Configuring and Using the IP AutoDome Keyboard Commands by Number Advanced FeaturesBasic Keyboard Operation Powering OnGetting Started Establishing AutoDome ControlTo set an address to a camera without an address Setting the Camera AddressKeyboard Commands FastAddressTo set or change a password locked command Setting PasswordsSpecial Passwords Password Security LevelPage On-Screen Display Menu Navigation Setup MenuTo open the main Setup Menu locked command Setup MenuSetup Menu Choices Auto Camera Setup MenuCamera Setup Menu Choices ATWOFF Constant Lens SetupLens Setup Menu Choices SpotPTZ Setup Menu PTZ Menu ChoicesNormal Page OSD Display Setup MenuDisplay Setup Menu Choices MomentaryCommunication Setup Menu Choices Communication Setup MenuInputs Alarm I/O SetupAlarm Setup Menu Choices Inputs SetupOutputs Outputs Setup MenuOutputs Setup Alarm RelayEmpty Rule Setup MenuRule Setup Menu Choices RuleRule # Choices Choose a language Menu Description Default Setting ExitLanguage Menu Language Menu ChoicesAdvanced Feature Setup Menu Choices Advanced Feature Setup Menu available with Series 500i onlyDiagnostics Menu Diagnostics EventsBist Configuring Preposition Tours Common AutoDome User Commands unlockedSetting AutoPan Mode Setting Preset ShotsRecording Tours Programming the Inactivity OperationPelco Protocol Mode Hardware ConfigurationSwitch Location LEDs RS485 CPU Module Board Address Guidelines Pelco Keyboard CommandsSpecial Preset Commands Preset Command DescriptionMain Setup Menu To open the Pelco main Setup Menu locked commandsPelco On-Screen Menus Command Lock locked Bosch Menu lockedPelco menu Bosch menu Outdoor Camera Setup unlockedPTZ Setup unlocked PTZ Setup Menu ChoicesRecording Autopivot = Factory Setting Focus / Iris Select Not Set Menu Description Default Setting Edit Password lockedRestore All Settings locked Other MenusPage Locked Function Comm Command Description Series Key Keyboard Commands by Number901-964 Define the Alarm Outputs from the Outputs Setup menu Advanced FeaturesAlarm Rules Example 1 Basic Alarm RuleTurn on AutoTrack Example 2 Advanced Alarm RuleMotion Detection with Region of Interest AutoTrackPrivacy Masking Virtual MaskingPre-position Tour To set up a scene with Motion DetectionOverview of Features Configuring and Using the IP AutoDomeSystem Requirements Connecting the IP AutoDome to the PCAutoDome IP System Configuration Configuring the IP CameraUsing Configuration Manager Installing the Required SoftwareChanging the Network Settings To install the softwareEstablishing a Connection Viewing Live Images and Controlling the AutoDome PTZNumber Description Configuring Data StreamsControlling Camera Operations View Control TabSystem and Event Logs Digital I/ONumber Description Entering a Keyboard Control CommandTo Enter a Keyboard Control Command Aux Control TabTo Set a Preset Shot To View a Preset ShotOn this page? link to open the IP AutoDome online help Page Troubleshooting Guide No camera control If amber LED does not light when given PTZ commands, thenCannot access user SettingsBackground is too Picture is darkColors are not cor Rect If O.K., thenIs dark Inside of EnviroDome Does not switch auto If O.K., then Matically when imageBubble is foggy If status reports Heater No Power, then Day/Night cameraGlossary of Cctv Terms Auto White Balance AWB BiphaseAutoScaling AutoTrackDay/Night IR sensitive Color TemperatureCtfid Configuration Tool for Imaging Devices Default ShutterFocal Length Fast AddressFiber Optic Transmission Field of ViewIPS Images Per Second Image StabilizationInfrared Illumination IP AddressModal Dispersion or Intermodal Dispersion Multimode FiberMulti-Protocol NightSense Preset TourPressurized Dry Nitrogen Housing Nema National Electrical Manufacturers Association RatingRule ResolutionRegion of Interest RS232/485UTP Unshielded Twisted Pair TCP/IP Transmission Control Protocol/Internet ProtocolTilt Tri-streamingPage Numerics IndexEn Index AutoDome Modular Camera System Jpeg En Index AutoDome Modular Camera System PTZ TCP/IP Function Comm Command Description Series Key User Commands by NumberPage Page Asia-Pacific Americas Europe, Middle East, Asia
Related manuals
Manual 139 pages 49.25 Kb

VG4-500I, VG4-200, VG4-300 specifications

Bosch Appliances is renowned for its commitment to quality and innovation, and their VG4 series of ventilation hoods is no exception. The VG4-300, VG4-200, and VG4-500I models are designed to cater to various kitchen needs, providing effective air filtration while maintaining aesthetic appeal.

The VG4-300 model is characterized by its sleek design and robust performance. It features a powerful motor that delivers efficient ventilation, removing smoke, odors, and grease from your kitchen swiftly. One of the standout features is its three-speed fan system, which allows users to select the appropriate level of airflow based on cooking intensity. Additionally, the grease filter is dishwasher-safe, ensuring easy maintenance and longevity.

In contrast, the VG4-200 model is perfect for those seeking a compact yet powerful solution. Designed for smaller kitchens, it doesn’t compromise on performance. This model also offers a three-speed fan, providing sufficient airflow for everyday cooking activities. The LED lighting integrated into the design enhances visibility on your cooktop while adding a modern touch to your kitchen. With a focus on energy efficiency, the VG4-200 operates quietly, allowing for a pleasant cooking experience without distraction.

The VG4-500I model is a standout in the series, designed for larger, more demanding kitchens. With increased airflow capacity, it can handle vigorous cooking styles with ease. It also boasts an advanced filtration system that captures more airborne particles, enhancing indoor air quality. The model features a touch control panel for ease of use, giving users the ability to adjust settings seamlessly. Like its counterparts, the VG4-500I includes LED lighting and dishwasher-safe filters, making maintenance straightforward.

All three models in the VG4 series exemplify Bosch's dedication to advanced technologies. Noise reduction features ensure that the ventilation system operates quietly, allowing conversations in the kitchen without disturbance. Furthermore, the stylish and modern finishes of each model enhance kitchen aesthetics, making them suitable for any decor.

In summary, Bosch Appliances’ VG4-300, VG4-200, and VG4-500I ventilation hoods offer a range of features tailored to meet different culinary needs. From effective air filtration and energy-efficient operation to user-friendly controls and elegant designs, these models are crafted to elevate the cooking experience while ensuring a fresh and clean kitchen environment.