Bosch Appliances VG4-200, VG4-300, VG4-500I user manual Glossary of Cctv Terms

Page 57

AutoDome Modular Camera SystemGlossary of CCTV Terms en 53

10

Glossary of CCTV Terms

A

Address

Each AutoDome has a numerical address in the control system in which it is located. This allows the appropriate dome to be operated. The address may be set locally using the Bilinx Configuration Tool for Imaging Devices (CTFID) or remotely using the Fast Address function (see Fast Address).

Advanced Alarm Control (AAC)

AutoDome’s flexible and sophisticated alarm management subsystem that allows “rules” to be created that define which input(s) activate one or more outputs (see Alarm Rule). In its most basic form, a rule could define which input(s) should activate which output(s). In a more complex form, a rule can be programmed to take a specific keyboard command (pre-existing or not) and perform a dome function, or any combination of the above.

Advanced Diagnostics

Bosch’s combination of built-in On Screen Displays (OSD) and status LEDs that are used to check critical camera parameters such as internal temperature, input voltage levels, and network connectivity. This allows a technician to quickly determine the source of problems and ensure that the dome is functioning within correct operating limits.

Aperture

The size of the opening in the iris, which controls the amount of light that reaches the CCD Sensor. The larger the F-Stop numbers, the less light reaches the sensor.

AutoBlack

A technique of boosting the video signal level to produce a full amplitude video signal even when the scene contrast is less than full range (glare, fog, mist, etc.). The darkest part of the signal is set to black and the lightest part to white, thus increasing the contrast.

AutoDome

Fully integrated, high speed, pan/tilt/zoom camera built into a protective dome housing allowing full and continuous 360° coverage of the scene.

Auto Focus

The lens continuously adjusts to the correct focus automatically for the sharpest picture.

AutoIris

The lens iris opening is automatically adjusted to allow the correct illumination of the camera sensor.

Automatic Gain Control (AGC)

The electronics that regulate the gain or amplification of the video signal.

AutoPan

The camera pans continuously between right and left limit settings.

AutoPivot

As the camera tilts through the vertical position, the camera is rotated to maintain the correct orientation of the image.

AutoPlayback

This function records the sequence of movements of the AutoDome PTZ for later playback allowing a set pattern to be repeated automatically. This function is often called Guard Tour.

Bosch Security Systems, Inc.

VG4-200, VG4-300, VG4-500i Series User’s Manual

F01U064036 1.0 2007.01

Image 57
Contents AutoDome Modular Camera System Page Preface SymbolsAudience Document ConventionsRelated Publications Customer Support and ServiceTable of Contents Configuring and Using the IP AutoDome Keyboard Commands by Number Advanced FeaturesGetting Started Powering OnEstablishing AutoDome Control Basic Keyboard OperationKeyboard Commands Setting the Camera AddressFastAddress To set an address to a camera without an addressSpecial Passwords Setting PasswordsPassword Security Level To set or change a password locked commandPage To open the main Setup Menu locked command Setup MenuSetup Menu On-Screen Display Menu NavigationSetup Menu Choices Camera Setup Menu Choices Camera Setup MenuATW AutoOFF Lens Setup Menu Choices Lens SetupSpot ConstantPTZ Setup Menu PTZ Menu ChoicesNormal Page Display Setup Menu Choices Display Setup MenuMomentary OSDCommunication Setup Menu Choices Communication Setup MenuAlarm Setup Menu Choices Alarm I/O SetupInputs Setup InputsOutputs Setup Outputs Setup MenuAlarm Relay OutputsRule Setup Menu Choices Rule Setup MenuRule EmptyRule # Choices Language Menu Menu Description Default Setting ExitLanguage Menu Choices Choose a languageAdvanced Feature Setup Menu Choices Advanced Feature Setup Menu available with Series 500i onlyDiagnostics Menu Diagnostics EventsBist Setting AutoPan Mode Common AutoDome User Commands unlockedSetting Preset Shots Configuring Preposition ToursRecording Tours Programming the Inactivity OperationPelco Protocol Mode Hardware ConfigurationSwitch Location LEDs RS485 CPU Module Board Special Preset Commands Pelco Keyboard CommandsPreset Command Description Address GuidelinesMain Setup Menu To open the Pelco main Setup Menu locked commandsPelco On-Screen Menus Command Lock locked Bosch Menu lockedPelco menu Bosch menu Outdoor Camera Setup unlockedPTZ Setup unlocked PTZ Setup Menu ChoicesRecording Autopivot = Factory Setting Focus / Iris Select Restore All Settings locked Menu Description Default Setting Edit Password lockedOther Menus Not SetPage Locked Function Comm Command Description Series Key Keyboard Commands by Number901-964 Alarm Rules Advanced FeaturesExample 1 Basic Alarm Rule Define the Alarm Outputs from the Outputs Setup menuTurn on AutoTrack Example 2 Advanced Alarm RulePrivacy Masking AutoTrackVirtual Masking Motion Detection with Region of InterestPre-position Tour To set up a scene with Motion DetectionOverview of Features Configuring and Using the IP AutoDomeSystem Requirements Connecting the IP AutoDome to the PCAutoDome IP System Configuration Configuring the IP CameraChanging the Network Settings Installing the Required SoftwareTo install the software Using Configuration ManagerEstablishing a Connection Viewing Live Images and Controlling the AutoDome PTZControlling Camera Operations Configuring Data StreamsView Control Tab Number DescriptionSystem and Event Logs Digital I/OTo Enter a Keyboard Control Command Entering a Keyboard Control CommandAux Control Tab Number DescriptionTo Set a Preset Shot To View a Preset ShotOn this page? link to open the IP AutoDome online help Page Troubleshooting Guide Cannot access user If amber LED does not light when given PTZ commands, thenSettings No camera controlColors are not cor Picture is darkRect If O.K., then Background is tooBubble is foggy If status reports Heater No Power, then Does not switch auto If O.K., then Matically when imageDay/Night camera Is dark Inside of EnviroDomeGlossary of Cctv Terms AutoScaling BiphaseAutoTrack Auto White Balance AWBCtfid Configuration Tool for Imaging Devices Color TemperatureDefault Shutter Day/Night IR sensitiveFiber Optic Transmission Fast AddressField of View Focal LengthInfrared Illumination Image StabilizationIP Address IPS Images Per SecondModal Dispersion or Intermodal Dispersion Multimode FiberMulti-Protocol Pressurized Dry Nitrogen Housing Preset TourNema National Electrical Manufacturers Association Rating NightSenseRegion of Interest ResolutionRS232/485 RuleTilt TCP/IP Transmission Control Protocol/Internet ProtocolTri-streaming UTP Unshielded Twisted PairPage Numerics IndexEn Index AutoDome Modular Camera System Jpeg En Index AutoDome Modular Camera System PTZ TCP/IP Function Comm Command Description Series Key User Commands by NumberPage Page Asia-Pacific Americas Europe, Middle East, Asia
Related manuals
Manual 139 pages 49.25 Kb

VG4-500I, VG4-200, VG4-300 specifications

Bosch Appliances is renowned for its commitment to quality and innovation, and their VG4 series of ventilation hoods is no exception. The VG4-300, VG4-200, and VG4-500I models are designed to cater to various kitchen needs, providing effective air filtration while maintaining aesthetic appeal.

The VG4-300 model is characterized by its sleek design and robust performance. It features a powerful motor that delivers efficient ventilation, removing smoke, odors, and grease from your kitchen swiftly. One of the standout features is its three-speed fan system, which allows users to select the appropriate level of airflow based on cooking intensity. Additionally, the grease filter is dishwasher-safe, ensuring easy maintenance and longevity.

In contrast, the VG4-200 model is perfect for those seeking a compact yet powerful solution. Designed for smaller kitchens, it doesn’t compromise on performance. This model also offers a three-speed fan, providing sufficient airflow for everyday cooking activities. The LED lighting integrated into the design enhances visibility on your cooktop while adding a modern touch to your kitchen. With a focus on energy efficiency, the VG4-200 operates quietly, allowing for a pleasant cooking experience without distraction.

The VG4-500I model is a standout in the series, designed for larger, more demanding kitchens. With increased airflow capacity, it can handle vigorous cooking styles with ease. It also boasts an advanced filtration system that captures more airborne particles, enhancing indoor air quality. The model features a touch control panel for ease of use, giving users the ability to adjust settings seamlessly. Like its counterparts, the VG4-500I includes LED lighting and dishwasher-safe filters, making maintenance straightforward.

All three models in the VG4 series exemplify Bosch's dedication to advanced technologies. Noise reduction features ensure that the ventilation system operates quietly, allowing conversations in the kitchen without disturbance. Furthermore, the stylish and modern finishes of each model enhance kitchen aesthetics, making them suitable for any decor.

In summary, Bosch Appliances’ VG4-300, VG4-200, and VG4-500I ventilation hoods offer a range of features tailored to meet different culinary needs. From effective air filtration and energy-efficient operation to user-friendly controls and elegant designs, these models are crafted to elevate the cooking experience while ensuring a fresh and clean kitchen environment.