AutoDome Modular Camera System | Getting Started en | 5 |
|
|
|
4.Follow the
To change or clear an address to a camera with an address:
1.Select the camera number you want to FastAddress. The system displays the camera number on the keyboard and the image on the corresponding monitor.
2.Press
3.Press
4.Follow the on screen instructions. You receive an
| i | NOTICE! FastAddress is stored in nonvolatile memory and does not change if the power is |
| turned off or if the default settings are restored. | |
|
| |
|
|
|
1.4 |
| Setting Passwords |
Passwords are used to control access to locked command menus. Unlocked commands are available to all users. Passwords are four (4) digits in length.
1.4.1Special Passwords
Password | Security Level |
|
|
0000 (default) | Enables security and requires a user to enter the unlock command |
| |
|
|
9999 | Disables all security and allows all users to access locked commands. |
|
|
To set or change a password (locked command):
1.Press
2.Press
3.Tilt the joystick up or down to choose a number. Tilt the joystick right to move to the next number position.
4.Follow the
Bosch Security Systems, Inc. | F01U064036 1.0 2007.01 |