Bosch Appliances VG4-300, VG4-200, VG4-500I user manual Pelco On-Screen Menus, Main Setup Menu

AutoDome Modular Camera SystemPelco On-Screen Menus en 27

5	Pelco On-Screen Menus
	You can program the AutoDome through the Pelco on-screen display (OSD) menus. To access
	the Pelco menus, you must configure the AutoDome for Pelco Mode and invoke the Pelco
	main Setup Menu.
5.1	Setup Menu
	The Pelco main Setup Menu provides access to the programmable AutoDome settings. Some
	menu items are locked and require a system password to use. Menu items marked with an *
	are the default settings.
	To open the Pelco main Setup Menu (locked commands):
	1.	Press 95-PRESET(press the PRESET button for approximately 2 seconds to open).
	2.	Use the joystick to highlight a menu item.
	3.	Press either the Focus or the Iris key to open a menu item.
	4.	Follow the on-screen instructions at the bottom of the screen.
		Setup Menu
	Exit...
	Command Lock:		OFF
	Bosch Menu
	Camera Setup
	PTZ Setup
	Edit Password
	*FastAddress:		Not Set
	Advanced
	Software Version
	Ack and Reset Alarms
	Restore All Settings
	Reset All Memory

i

*= Factory Setting Focus / Iris: Select

NOTICE! Use Zoom to select the Exit item from anywhere in a menu.

Menu	Description
Exit	Exits the menu.
Command Lock (locked)	Allows or prohibits accessing locked commands. (If password is set, you are
	prompted to enter the password.
Bosch Menu (locked)	Accesses the full AutoDome configuration menu and all AutoDome settings.
Camera Setup	Accesses the White Balance and Night Mode camera settings.
PTZ Setup	Accesses the tours, tour periods, scan speed, edit presets, limit stops, record-
	ing, and AutoPivot settings.
Edit Password (locked)	Changes the password.
FastAddress (locked)	Sets or changes a camera address.
Software Version	Displays the current software versions.
Ack and Reset Alarms	Acknowledges and resets active alarms.
Restore All Settings	Restores all settings to their original default setting.
(locked)
Reset All Memory (locked)	Clears all settings, including scene shots, tours, and recordings stored in the
	AutoDome memory.

Bosch Security Systems, Inc. VG4-200, VG4-300, VG4-500i Series User’s Manual F01U064036 1.0 2007.01