Axis Communications AXIS P3301-V manual About this Document, Legal Considerations, Liability, RoHS

Page 2

About this Document

This document includes instructions for installing the AXIS P3301/-V on your network. Previous experience of networking will be beneficial when installing the product.

Legal Considerations

Video and audio surveillance can be prohibited by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

This product includes one (1) H.264 decoder license. To purchase further licenses, contact your reseller.

Electromagnetic Compatibility (EMC)

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a different circuit to the receiver. Consult your dealer or an experienced radio/TV technician for help. Shielded (STP) network cables must be used with this unit to ensure compliance with EMC standards.

USA - This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his/her own expense will be required to take whatever measures may be required to correct the interference.

Canada - This Class B digital apparatus complies with Canadian ICES-003.

Europe - This digital equipment fulfills the requirements for radiated emission according to limit B of EN55022, and the requirements for immunity according to EN55024 residential and commercial industry.

Japan - This is a class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.

Australia - This electronic device meets the requirements of the Radio communications (Electromagnetic Compatibility) Standard AS/NZS CISPR22.

Equipment Modifications

This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

Liability

Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and documentation without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.

RoHS

This product complies with both the European RoHS directive, 2002/95/EC, and the Chinese RoHS regulations, ACPEIP.

WEEE Directive

The European Union has enacted a Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE Directive). This directive is applicable in the European Union member states.

The WEEE marking on this product (see right) or its documentation indicates that the product must not be disposed of together with household waste. To prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.

Business users should contact the product supplier for information on how to dispose of this product correctly. This product should not be mixed with other commercial waste. For more information, visit www.axis.com/techsup/commercial waste.

Support

Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

download user documentation and firmware updates

find answers to resolved problems in the FAQ database. Search by product, category, or phrases

report problems to Axis support by logging in to your private support area.

The AXIS P3301/-V uses a 3.0V CR2032 Lithium battery, for more information please see page 73.

Image 2
Contents Installation Guide Electromagnetic Compatibility EMC About this DocumentLegal Considerations Equipment ModificationsInstallation steps Package contentsDimensions Hardware overviewMounting on a hard ceiling Install the hardwareMount the camera Ceiling Axis P3301/-V ScrewsMethod Recommended for Assign an IP addressConnect the cables Assign the IP address manually optional Axis IP Utility single camera/small installationAutomatic discovery Assign IP addresses in multiple devices Axis Camera Management multiple cameras/large installationsAssign an IP address in a single device Click the OK buttonClick the Create self-signed certificate button Set the passwordEnter the password as set above, and click OK Access the video stream Adjust the image and focus Complete the installationOther methods of setting the IP address Set the IP address with ARP/PingFunction Pin Specifications Unit connectorsAuxiliary power and GND Axis P3301/-V Max mA Pushbutton Connection diagramLED indicators Color IndicationFurther information Resetting to the Factory Default SettingsAccessing the camera from the Internet TipPage Installez le matériel. Reportez-vous à la Étapes de linstallationAxis P3301/-V Guide dinstallation Terminez linstallation. Reportez-vous à laPrésentation du matériel Montage sur plafond dur Installation du matérielMontage de la caméra Plafond Axis P3301/-V VisBranchement des câbles Méthode Recommandée pour Système DexploitationParamétrage dune adresse IP RemarquesParamétrage manuel de ladresse IP optionnel Axis IP Utility Une seule caméra/petite installationDétection automatique Sélectionnez la caméra Axis P3301 dans la listeCliquez sur le bouton OK Paramétrage dune adresse IP à un seul dispositifParamétrage dadresses IP à plusieurs dispositifs Définition du mot de passe Pour créer une connexion HTTPS, cliquez sur ce boutonAccès au flux vidéo Terminez linstallation Réglage de limage et de la mise au pointSystème Remarques Dexploitation UPnP Autres méthodes de définition de ladresse IPDéfinition de ladresse IP à laide dARP/Ping Serveur DhcpAxis P3301/-V Guide dinstallation Remarques Fonction Broc Remarques Spécifications Connecteurs de lunitéAlimentation auxiliaire et mise à la terre Témoins DEL Diagramme de connexionAxis P3301/-V Max mA Par exemple Un bouton de o Commande Couleur IndicationPlus dinformations Rétablissement des paramètres dusine par défautAccès à la caméra via Internet ConseilLieferumfang InstallationsschritteAxis P3301/-V Installationsanleitung Komponente Modell/Variante/AnmerkungSeite HardwareübersichtAbmessungen Deckenmontage Hardware installierenKamera befestigen Fahren Sie mit Kabel anschließen, auf Seite 34 fortHinweise IP-Adresse zuweisenKabel anschließen Methode Empfohlen für BetriebssystemManuelle Zuweisung der IP-Adresse optional Axis IP Utility Einzelne Kamera/kleine InstallationAutomatische Erkennung HinweisIP-Adressen mehreren Geräten zuweisen Axis Camera Management Mehrere Kameras/große InstallationEine IP-Adresse einem einzelnen Gerät zuweisen Klicken Sie auf OKKennwort festlegen Auf Video-Stream zugreifen Einstellring Unter Basic Configuration FocusBildschärfe einstellen Ausrichtung einIP-Adresse per ARP/Ping zuweisen Installation abschließenAndere Methoden zum Festlegen der IP-Adresse Syntax Unter Windows Kameraanschlüsse Funktion Pin Hinweise Technische DatenAxis P3301/-V Max mA Schalter AnschlussschaltbildLED-Anzeigen Farbe BedeutungWeitere Informationen Werkseitige Standardeinstellungen wiederherstellenÜber das Internet auf die Kamera zugreifen TippCompletamento dellinstallazione. Vedere la sezione pagina Procedura di installazioneGuida allinstallazione di Axis P3301/-V Contenuto della confezionePagina DimensioniPanoramica dell’hardware Montaggio su un controsoffitto Installazione dellhardwareMontaggio della videocamera Soffitto Axis P3301/-V VitiMetodo Consigliato per… Assegnazione di un indirizzo IPCollegamento dei cavi Assegnazione manuale dellindirizzo IP facoltativo Axis IP Utility videocamera singola/piccole installazioniRilevamento automatico NotaAssegnazione degli indirizzi IP a più videocamere Axis Camera Management più videocamere/grandi installazioniAssegnazione di un indirizzo IP a una singola videocamera Fare clic sul pulsante OKImpostazione della password Accesso al flusso video Regolazione della messa a fuoco Posizionare lobiettivo nella posizione desiderataCompletamento dellinstallazione Altri metodi di impostazione dell’indirizzo IPImpostazione dellindirizzo IP con ARP/Ping Sintassi di WindowsFunzione Pin Dati tecnici ConnettoriAlimentazione ausiliaria e presa di terra Axis P3301/-V Max mA Schema delle connessioniIndicatori LED Colore IndicazioneUlteriori informazioni Accesso alla videocamera da InternetRipristino delle impostazioni di fabbrica SuggerimentoAxis P3301/-V Guia de instalación Pasos para la instalaciónContenido del paquete Artículo Modelos/variantes/notasPágina DimensionesPresentación del hardware Montaje en techo duro Instalación del hardwareMontaje de la cámara Notas Configuración de la dirección IPConexión de los cables Método Recomendado paraAxis P3301-V aparecerá en Axis IP Utility como Axis P3301 Detección automáticaAsignación manual de la dirección IP opcional Haga clic en el botón OK Aceptar Asigne una dirección IP en un dispositivo individualAsignación de direcciones IP en varios dispositivos Configuración de la contraseña EspañolAcceda al vídeo continuo Tornillo de bloqueo Ajuste la imagen y el enfoqueComplete la instalación Botón del Zoom Tornillo de Inclinacion EnfoqueOtros métodos para configurar la dirección IP Configuración de la dirección IP con ARP/PingNotas Función Pin Notas Especificaciones Conectores de la unidadAlimentación auxiliar y toma de tierra Axis P3301/-V Máx mA Diagrama de conexionesIndicadores LED Color IndicaciónMás información Restablecimiento de los valores inicialesAcceso a la cámara desde Internet Un consejoAxis P3301/-V Installation Guide Installation Guide Ver.1.00 Axis P3301/-V Axis Communications AB