Panasonic WV-NS324 operating instructions Ddns Dynamic DNS Consult your system administrator

Page 22

3.Enter "admin" in the user name line. According to the default setting, you need not enter the pass- word. The "Network Setup" window appears.

4.Set the following parameters.

Note: Ask your system administrator about param- eters if you are unsure.

IP Address: Enter numbers 0 through 255 into four sections split by dots.

Netmask: Enter numbers 0 through 255 into four sections split by dots.

HTTP Port: Enter different numbers for each when multiple cameras are connected.

DHCP (Dynamic Host Configuration Protocol): When set to ON, you need not input the IP address and netmask.

DNS (Domain Name System): Set to ON when using DNS. Enter the primary address. If nec- essary, enter the secondary address.

When set to AUTO, the DHCP server will auto- matically send you an address.

DDNS (Dynamic DNS): Consult your system administrator.

Note: You can correct the DHCP setting to off via the Panasonic IP setting or Camera control menu if you have wrongly set DHCP to ON in a none-DHCP/DHCP server system.

For details refer to Setup included in the "Panasonic IP Setup" Software provided.

5.Click the [SET&REBOOT] button. The changed parameters will be validated, and the camera and the PC will restart.

Notes:

•Do not omit step 4 above to validate new parameters.

•Wait around 5 seconds or more when execut- ing [SET&REBOOT] button.

6.Close the browser software, and the PC.

-22-

Image 22

Contents Operating Instructions English Version Important Safety Instructions Contents System Requirements FeaturesPreface TrademarksPreset Data Uploading or Downloading Camera CleaningDocument Convention Precautions Construction Disassembling the Camera InstallationSetting Switches Assemble the CameraCutout in Decoration Cover Top Cable ExitTop Cable Exit Connect this to 24V AC Class 2 Power Supply only AC Power Supply ConnectionHow to Assemble the Cable with the Accessory Connector ConnectionsNetwork Connections Necessaries Connection to Internet TypeSetup with the Provided Panasonic IP Setup Software Setup with PCDNS Network Setup of Your PC Preparations for the PCNetwork Setup of the Camera Page Dhcp Network Setup Parameters vs. Connection TypeConnection type Parameter description DdnsDhcp server assigns an IP address to the camera automatical Preliminary Setup Ddns Dynamic DNS Consult your system administrator Multi Screen Select Access from the PCOperating the Camera Camera ControlAccess from a System Device PAN/TILT ZOOM/FOCUS Iris Preset Auto PAN Function Comparison / PC Network vs. Camera siteCamera Setup Menus Prior to SetupButtons Used for Setup Menus From the PCSetup Setup MenuFocus Switch Presetting Setting ProceduresMenu Display To Set Panning/Tilting Positions Position Setting Position SETTo Set the Lens Zoom and Focus Positions Preset Identification Setting Preset ID Auto Focus Setting AF Mode Deleting Preset PositionsLight Control Setting ALC/MANUAL To Return to the Preset Number Set MenuAuto Mode Selection Auto Mode Home Position Setting HomeSelf-return Setting Self Return OFF Auto PANAuto Image Hold Image Hold Flip-A-Chip SettingCleaning Cleaning 30S 20S 10SCamera Identification Camera ID Camera SettingTo Display the Camera Setting Menu To Enter a New Camera IDALC Mode with BLC on ALC Mode with BLC OFFGain Control AGC Shutter Speed Setting ShutterLine-lock Sync Mode LL Synchronization SyncAuto-Tracing White Balance Mode ATW White Balance White BALAutomatic White Balance Control Mode AWC Electronic Zoom EL-ZOOMMotion Detector Motion DET Electronic Sensitivity Enhancement Sens UPX4 FIX X2 FIX OFF Special Menu Special Demonstration Display Demo ModeDigital Noise Reduction DNR Reset to the Factory Default Settings To Restore the Camera Default Position RefreshCamera Resetting Camera Reset To Close the Special MenuCamera Setup with PC Image Setup Setup from PCAlarm Setup FTP Client Setup User Setup Host Setup System Setup Multiscreen Setup Preset Setup Auto Pan SettingCommon procedures Setting the SwitchesInitializing Viewing Pictures Still Picture Storage to the PCAlarm Functions When alarm arisesDetection Area Setup Canceling Alarm DisplayVMD Setup Transferring Picture FilesPage Reviewing Alarm Pictures Step Resetting AlarmHow to customize contents of e-mail notification Substitution Letter Description indication type etcUser Name admin Password None Step Auxiliary Output Control Auxiliary Output ControlTroubleshooting Network Section SpecificationsPrevention of Blooming and Smear Camera SectionOptional Accessories AccessoriesLens/Mechanism sections Appendix Panasonic Digital Communications & Security Company