Panasonic WV-NS324 Electronic Zoom EL-ZOOM, Automatic White Balance Control Mode AWC

2.For fine adjustment of the ATW, press the CAM (SET) key. The ATW fine adjustment menu appears on the monitor screen.

** ATW **

R••••••••

- +

B••••••••

- +

RET

3.Move the cursor to RET by using the joystick and press the CAM (SET) key to return to the SET UP menu.

(2)Automatic White Balance Control Mode (AWC)

1.Move the cursor to WHITE BAL and select AWC → PUSH SET by using the joystick.

** SET		UP **
CAMERA ID		ON	O
ALC/MANUAL		ALC	O
SHUTTER		OFF
AGC		ON(MID)
SYNC		INT
WHITE BAL		AWC→PUSH SET
AF MODE		MANUAL
EL-ZOOM		ON
SENS UP		OFF
MOTION DET		OFF	O
RET	SPECIAL

2.Press the CAM (SET) key to start the white balance setup. PUSH SW is highlighted to indicate that white balance is being set.

3.PUSH SW returns to normal when balance setting is completed.

4.For fine adjustment of the AWC, move the cursor to AWC and press the CAM (SET) key. The AWC fine adjustment menu appears on the monitor screen.

** AWC **

R••••••••

- +

B••••••••

- +

RET

5.Move the cursor to RET by using the joystick and press the CAM (SET) key to return to the SET UP menu.

●Auto Focus Setting (AF MODE)

The camera adjusts the focus automatically by sensing the centre of the picture.

MANUAL: Auto-focus is activated only when the AF key on the controller is pressed.

AUTO: Auto-focus is activated automatically while a manual pan, tilt or zoom operation is pe

The factory default setting is AUTO.

** SET		UP **
CAMERA ID		ON	O
ALC/MANUAL		ALC	O
SHUTTER		OFF
AGC		ON(MID)
SYNC		INT	O
WHITE BAL		ATW
AF MODE		MANUAL
EL-ZOOM		ON
SENS UP		OFF
MOTION DET		OFF	O
RET	SPECIAL

Note:

The auto focus lens may not function properly in the AUTO mode under the following conditions.

1.Dirt or water on window glass

The auto focus may focus on the dirt or water.

2.Low lighting or illumination

3.Bright objects or high intensity objects

4.Single color object such as a white wall or fine felt

5.No centre objects and sloping objects

6.Far and near objects on the screen

●Electronic Zoom (EL-ZOOM)

The electronic zoom magnifies a scene 5 times. With a 10-time optical zoom lens, the camera is capable of 50- time zoom.

1.Move the cursor to EL-ZOOM and select ON or OFF by moving the joystick to the right or left, and then press the CAM (SET) key.

The factory default setting is ON.

** SET		UP **
CAMERA ID		ON	O
ALC/MANUAL		ALC	O
SHUTTER		OFF
AGC		ON(MID)
SYNC		INT	O
WHITE BAL		ATW
AF MODE		MANUAL
EL-ZOOM		ON
SENS UP		OFF
MOTION DET		OFF	O
RET	SPECIAL

ON: 5-time electronic zoom is available with the ZOOM switch on the controller.

OFF: The electronic zoom function is not used.

-41-