Panasonic WV-NS324 To Display the Camera Setting Menu, Camera Identification Camera ID

■Camera Setting

To Display the Camera Setting Menu

Move the cursor to CAMERA O, and press the CAM (SET) key. The camera setting menu appears.

** SET UP MENU **

PRESET 1 O

MAP O

HOME POSITION OFF

	SELF RETURN		OFF
	AUTO MODE		OFF
	FLIP-A-CHIP		ON
	CLEANING		OFF
	IMAGE HOLD		OFF
	CAMERA O
	NETWORK	O
	** SET		UP **
CAMERA ID			ON	O
ALC/MANUAL			ALC	O
SHUTTER			OFF
AGC			ON(MID)
SYNC			INT	O
WHITE BAL			ATW
AF MODE			MANUAL
EL-ZOOM			ON
SENS UP			OFF
MOTION DET			OFF	O
RET		SPECIAL

●Camera Identification (CAMERA ID)

You can use the camera identification to assign a name to the camera. The camera ID consists of up to 16 alphanumeric characters. You can select whether to have the camera ID displayed on the monitor screen or not.

** SET		UP **
CAMERA ID		ON	O
ALC/MANUAL		ALC	O
SHUTTER		OFF
AGC		ON(MID)
SYNC		INT	O
WHITE BAL		ATW
AF MODE		MANUAL
EL-ZOOM		ON
SENS UP		OFF
MOTION DET		OFF	O
RET	SPECIAL

The factory default setting is OFF.

ON: Camera ID appears on the monitor screen.

OFF: Camera ID does not appear.

Press the CAM (SET) key to display the camera ID set- ting menu.

To Enter a New Camera ID

(1)Move the cursor to the desired character using the joystick, and press the CAM (SET) key.

(2)The selected character appears in the editing area. (The pointer in the editing area moves to the right automatically at this moment.) To enter a blank, select SPACE.

(3)Repeat the above procedure until all characters are entered.

Note: Refer to page 32 for POSI, RET and RESET.

CAMERA ID -- 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$

SPACE

----POSI RET RESET

................

●Light Control Setting (ALC/MANUAL)

You can select the mode for adjusting the lens iris. There are two modes as follows:

ALC: The lens iris is automatically adjusted to suit the brightness of the object.

You can select one of two modes (BLC ON or BLC OFF) of backlight compensation.

Backlight compensation is available in the ALC mode. It eliminates strong background light which makes the camera picture dark such as a spotlight.

MANUAL: The lens iris is fixed at the value that you have set regardless of the brightness of an object.

1.Display the SET UP menu on the monitor screen by referring to page 29.

** SET		UP **
CAMERA ID		ON	O
ALC/MANUAL		ALC	O
SHUTTER		OFF
AGC		ON(MID)
SYNC		INT	O
WHITE BAL		ATW
AF MODE		MANUAL
EL-ZOOM		ON
SENS UP		OFF
MOTION DET		OFF	O
RET	SPECIAL

2.The factory default setting is ALC.

When you select ALC, set backlight compensation. Note: The backlight compensation submenu asso- ciated with this menu is described separately and should be set up after installing the cam- era at the site and observing the actual site

picture.

3.When MANUAL is selected, quit the setup menu by pressing the MON (ESC) key. Press the OPEN or CLOSE key on the controller for iris adjustment.

-37-