PRIOR TO SETUP
This section describes setup procedures common to accesses from the PC, e.g. transmitting images to an FTP server, sending alarm notice mail, auxiliary device control, clock setup, and LED control.
Buttons Used for Setup Menus
Click the buttons on the computer display. Each button is assigned functions in the setup as follows.
Menu ON/OFF button: Opens or closes the setup menu.
ESC button: Returns to the previous menu (one layer higher) .
UP/DOWN button: Moves up and down the cursor (pointer).
RIGHT/LEFT button: Selects parameters, adjusts some levels.
SET button: Validates the selection, opens a detailed menu.
See page 45.
See page 45.
Camera Setup Menus
•From the PC
1.Open the main page of the
Login as a
2.Click the [Camera Setup] button on the left side of the screen.
The login dialog box will appear.
Note: Confirm the entered IP address when neither the dialog box nor the main page appears. You may need to
3.Enter the registered user name and password. Note: Enter "admin" when you operate the system
for the very first time, or you have not regis- tered user names yet. At this time, you need not to enter the password.
Menu control buttons will appear under the camera image.
4.Click the [Menu ON] button to overlay ** SET UP MENU ** on the camera image. The cursor is high- lighted in the window.
Note: Refer to the next page for setup operations.
5.Click the [MENU OFF] button after finishing the setup operations.
The changed settings will be stored in the camera, and the overlaid camera menu will disappear.
Notes:
•If the browser screen pauses, access the cam- era again on the
•You can exit from the camera setup by clicking the [Return] button, though the menu is dis- played if the [MENU OFF] button has not been clicked yet.