Panasonic GP-US522HA, GP-US532HA operating instructions Mounting the Lens, Lens Mount

Mounting the Lens

Caution :

Keep the POWER ON/OFF switch of the camera con- trol unit in the OFF position throughout the installation.

Lens Mount

1.Remove the front cap of the camera head and confirm that the surface of the optical filter of the camera head is clean.

If the surface of the optical filter is dirty clean it with a blower brush which is for film camera lenses (available at your local camera store).

2.Mount the C-mount lens by turning it clockwise onto the lens mount of the camera head.

Cautions:

•Do not use any lens which has more than 1/8" (3.5mm) of protrusion for lens mounting. (GP- US522)

•Do not open the lens iris wider than the F2.8 stops. (GP-US522)

•Do not open the lens iris wider than the F2.2 stops. (GP-US532)

Special C-mount:	Less than 1/8”
	(Less than 3.5mm)

10