Panasonic GP-US522HA Video Output Connector S-VIDEO OUT, RGB/SYNC Output Connector RGB/SYNC

Page 8

24.S-Video Output Connector (S-VIDEO OUT)

The luminance (Y) and chrominance (C) signals for VCR or monitor are provided at this connector.

43

21

S-VIDEO OUT (Mini-DIN,4-pin)

Pin No.

Description

1Y Ground

2C Ground

3Y Signal Output (0.714V[p-p](Y level)/75 Ω )

4C Signal Output (0.286V[p-p](Burst Level)/75 Ω )

25.RGB/SYNC Output Connector (RGB/SYNC)

The red, green, blue, sync and composite video sig- nals are provided at this connector.

51

96

RGB/SYNC (D-SUB,9-pin)

Pin No.	Description
1	Ground( GND)
2	Ground (GND)

3	Red (R) Output (0.7V[p-p]/75 Ω	)

4	Green (G) Output (0.7V[p-p]/75 Ω )
5	Blue (B) Output (0.7V[p-p]/75 Ω	)

6	Composite Video Output (1.0V[p-p]/75 Ω )

7	Sync (SYNC) Output (4.0V[p-p] or 0.3V[p-p]/75 Ω )
8	Ground (GND)
9	Ground (GND)

26.RS-232C Connector (RS-232C)

15

69

	Pin No	Signal
	Pin No	RS-232C
		RS-232C

	1	Ground

	2	TXD

	3	RXD

	4	DSR

	5	Ground

	6	DTR

	7	CTS

	8	RTS

	9	Ground

Note: Refer this connection to a qualified service par- son or system installer.

27.12V DC Input Terminals (12V DC IN)

These terminals accept an external DC power source supplying nominal power of 12V DC, 0.7A.

Cautions :

1.Connect to 12V DC (11.5 V - 16 V) class 2 power supply only.

2.To prevent fire or electric shock hazard, use a UL listed wire VW-1, Style 1007 cable for 12 V DC input terminals.

8

Image 8

Contents GP-US532HA Contents Features PrefacePrecautions Clean the faceplate with carePut the lens cap on the camera after using the camera Ask a qualified service person for installationCamera Cable Connector Power Indicator PowerLens Mount Camera Mounting Screw HoleAuto Warning Indicator Title Input Connector TitleCamera/Color Bar Selector CAM/BAR White Balance Selector ATW/AWC/MANUCamera Cable Connector Camera Gen-lock Signal Input Connector VBS/HDExternal HD and VD Mode Gen-Lock Signal Input Connector VDVideo Output Connector S-VIDEO OUT RGB/SYNC Output Connector RGB/SYNCRS-232C Connector RS-232C DC Input Terminals 12V DCConnections Internal Sync OperationMounting the Lens Lens MountSetup Item Button ItemThis button is used to move the cursor downwards Left Button aOpening the Setup menu Editing the Setup menuAll Reset Operation Press the page button for a few secondsCamera Identification Camera ID Setting ProceduresField/Frame Charging Mode Setting FLD/FRM Electronic Light Control Setting ELC ELC detection control area setting ELCManual setting of the ELC detection control area Manu Peak and Average Weight Control PEAK/AVEAGC detection control area setting AGC Electronic Shutter Speed Setting ShutterGain Control Setting Gain Synchronization Setting Sync Internal Sync Mode INTVBS Gen-lock Mode Extvbs Maximum +9 dBHorizontal Phase Adjustment H Phase Subcarrier Coarse Phase Adjustment SC CoarseSubcarrier Fine Phase Adjustment SC Fine VS Gen-lock Mode ExtvsBlack Balance Setting Black BAL External HD/VD Mode HD/VDExternal VD Mode VD Auto Black Balance Setting Black BALTo turn Scene File Setting Scene FileReturning to the Setup menu Clear Digital Noise Reduction Control Clean DNR Chroma Phase Control HUETo reset to the factory setting Gamma Correction GammaPrevention of Blooming and Smear Specifications Optional Accessories GP-CA522/4Character Generators Division of Matsushita Electric Corporation of America