PRECAUTIONS
1.Do not attempt to disassemble the camera or camera control unit.
To prevent electric shock, do not remove screws or covers.
There are no
2.Handle the camera and the camera control unit with care.
Do not abuse the camera and the camera control unit. Avoid striking, shaking, etc. The camera could be dam- aged by improper handling or storage.
3.Do not expose the camera or camera control unit to rain or moisture, or try to operate it in wet areas. Turn the power off immediately and ask a qualified ser- vice person for servicing. Moisture can damage the camera and the camera control unit, and also create the danger of electric shock.
4.Do not drop anything inside the camera or camera control unit.
Dropping a metal part for example inside the camera and camera control unit could permanently damage the unit.
5.Do not crush or pinch the camera cable. Avoid tight bends in the camera cable.
6.Never face the camera toward the sun.
Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused.
7.Do not use strong or abrasive detergents when cleaning the camera or the camera control unit body.
Use a dry cloth to clean the camera or the camera con- trol unit when dirty.
In case the dirt is hard to remove, use a mild detergent and wipe gently.
8.Clean the faceplate with care.
Do not clean the faceplate with strong or abrasive detergents. Use lens tissue or a cotton tipped applica- tor and ethanol.
9.Put the lens cap on the camera after using the camera.
After using the camera, turn the power of the camera control unit off, and put the lens cap on the camera head.
10.Do not connect units other than the camera head to the
Other connections may result in improper operation.
11.Do not operate the camera and the camera control unit beyond the specified temperature, humidity, or power source ratings.
Use the camera and the camera control unit under con- ditions where temperature is between 0°C - +45°C (32°F - 113°F), and humidity is below 90%. The input power resource is 12 V DC.
12.Ask a qualified service person for installation.
All necessary procedures with regards to installation of this product should be made by qualified service per- son or system installer.
Cautions
1.Connecting or disconnecting the camera cable to/from the camera control unit or camera head must be done after turning off the power of the camera control unit.
2.Use
4