Electronic Shutter Speed Setting Shutter

3-2. AGC detection control area setting (AGC CONT)

1.Set the ELC ON/OFF selector on the front panel of the camera control unit to the OFF position. Then confirm that the ELC parameter is OFF.

OFF

ELC

2.Move the cursor to the ELC parameter and press the PAGE button.

The AGC CONT menu appears.

** AGC CONT **

AREAALL

PEAK/AVE P....I....A

RET END

3.Follow step 3 descrebed for “3-1. ELC detection con- trol area setting (ELC CONT)” to select the desired detection area (AREA).

4.Follow steps 1 and 2 descrebed for “3-1-2. Peak and Average Weight Control (PEAK/AVE)” to set the detec- tion value.

1.Move the cursor to the SHUTTER parameter.

2.Select the shutter speed or MANU for manual setting from the following.

*MANU OFF (1/60) 1/100 1/250

1/500		1/1000		1/2000		1/4000		1/10000

3.When you have selected MANU, press the PAGE but- ton. The SHUTTER menu appears and the MANU SET parameter starts blinking.

** SET UP **

CAMERA ID	*OFF
FLD/FRM	FLD
ELC	*OFF
SHUTTER	*MANU
GAIN	AUTO
SYNC	INT
BLACK BAL	ABC
SCENE FILE	*SCENE1
END

** SHUTTER ** Blinking

MANU SET

100

/525

RET END

4.Select the desired electronic shutter speed by press- ing A or B. The adjustable range is 1/525-261/525 lines.

4.Electronic Shutter Speed Setting (SHUTTER)

Note: When ON is selected for ELC on the SETUP menu, this item is not available. To select the elec- tronic shutter speed, select OFF for ELC on the SETUP menu.

You can select the electronic shutter speed of 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000 or 1/10 000 sec- onds. The shutter speed can also be set manually.

** SET UP **

CAMERA ID	*OFF
FLD/FRM		FLD
ELC	*OFF
SHUTTER		OFF
GAIN		AUTO
SYNC		INT
BLACK BAL		ABC
SCENE FILE	*SCENE1
END

5. Gain Control Setting (GAIN)

You can set the gain (brightness level portion of an image) to automatic level adjustment (AUTO) or manu- al level adjustment (MANU).

** SET UP **

CAMERA ID	*OFF
FLD/FRM		FLD
ELC	*OFF
SHUTTER		OFF
GAIN		AUTO
SYNC		INT
BLACK BAL		ABC
SCENE FILE	*SCENE1
END

1.Move the cursor to the GAIN parameter.

2.Select AUTO or MANU. The gain of the video amplifier is changed according to the position of the automat- ic/manual gain selector (HIGH/LOW/OFF) on the front panel of the camera control unit.