•Opening the SETUP menu
Press the PAGE button for a few seconds.
** SET UP **
CAMERA ID | *OFF |
|
FLD/FRM | FLD | |
ELC | *OFF | |
SHUTTER | OFF | |
GAIN | AUTO | |
SYNC | INT | |
BLACK BAL | ABC | |
SCENE FILE | *SCENE1 | |
END |
|
|
•Editing the SETUP menu
To edit the SETUP menu (change settings), press the ITEM button to move the cursor to an item, and press A and B to change its parameter. After completing all the settings, move the cursor to END at the bottom line, and press the PAGE button. The new values are stored in the EEPROM (Electric Erasable and Programmable Read Only memory). These values remain valid until new values are stored, even if the power of the camera control unit is off.
** SET UP **
CAMERA ID | *OFF | |
FLD/FRM | FLD | |
ELC | *OFF | |
SHUTTER | OFF | |
GAIN | AUTO | |
SYNC | INT | |
BLACK BAL | ABC | |
SCENE FILE | *SCENE1 | |
|
|
|
END |
| |
•All Reset Operation
All Reset allows you to reset all setup menu items to the factory settings if you are unsure about the correct settings. Proceed as follows:
1.Repeat the above procedures to display the SETUP menu.
2.Move the cursor to END at the bottom line.
3.Press both A and B for a few seconds. The SETUP menu disappears on the monitor screen and the auto warning indicator lights red.
At this time, all adjustments and parameters are reset to the factory default settings. The auto warning indica- tor goes off if AWC or ABC is performed.
12