CONNECTIONS
Cautions :
1.Keep the DC POWER ON/OFF switch in the OFF posi- tion until all connections have been properly made.
2.Connect the camera head and camera control unit.
Internal Sync Operation
1.Connect the camera cable between the camera head and the camera control unit.
2.Connect the coaxial cable with BNC connectors between the video output connector of the camera control unit and the video monitor or VCR.
| Video | VCR or | |||
| Monitor | Video Monitor | |||
| 75Ω | VIDEO | 75Ω | VIDEO | |
| |||||
Coaxial | IN | OUT | IN | OUT | |
Cable | |||||
|
|
|
| ||
CCU
VBS/HD | VD | 75Ω | DC 12V IN | |
ON | OUT | |||
|
| OFF |
| 1 VIDEO 2 |
|
|
|
| RGB/SYNC |
3.Connect the power cable between the DC 12 V input terminals and the 12 V DC power supply unit (obtained locally).
•The maximum cable length between camera control unit and power supply unit is calculated as follows:
11.5V DC < VA - (R x 0.42 x L) < 16 V DC
L : Cable length (meter)
R : Resistance of copper wire (Ω /meter)
VA : DC output voltage of power supply unit
L standard = VA - 12 / 0.42 x R (meter)
L minimum = VA - 16 / 0.42 x R (meter)
L maximum = VA - 11.5 / 0.42 x R (meter)
Cautions :
1.Connect to 12 V DC (11.5 V - 16 V) class 2 power supply only.
2.To prevent fire or electric shock hazard, use a UL listed wire
Gen-lock Operation
1.Connect the camera cable between the camera head and the camera control unit.
2.Connect the coaxial cable with BNC connectors between the video output connector of the camera control unit and the video input connector of Special Effects Generator (SEG), and between the VBS/HD input connector of the camera control unit.
CCU
VBS/HD | VD | 75Ω | DC 12V IN | |
ON | OUT | |||
|
| OFF |
| 1 VIDEO 2 |
|
|
|
| RGB/SYNC |
| VBS/HD In |
| VIDEO Out |
|
|
|
|
|
|
| 75Ω set to ON |
|
|
|
| CCU |
VBS/HD | VD | 75Ω | DC 12V IN | |
ON | OUT | |||
|
| OFF |
| 1 VIDEO 2 |
|
|
|
| RGB/SYNC |
| VBS/HD In | VIDEO Out | ||
|
|
|
| 75Ω set to ON |
Black Burst 
VIDEO In
Out
Special Effects Generator
(SEG)
3.Connect the power cable between the DC 12 V input terminals and the 12V DC power supply unit (obtained locally).
Cautions :
1.Connect to 12 V DC (11.5 V - 16 V) class 2 power supply only.
2.To prevent fire or electric shock hazard, use a UL listed wire
9