Synchronization Setting Sync, Maximum +9 dB

If you select AUTO, the gain of the amplifier changes as follows.

Position	Gain
HIGH	Maximum +18 dB
LOW	Maximum +9 dB
OFF	0 dB

When you select MANU, the gain of the amplifier changes as follows.

Position	Gain
HIGH	+18 dB (Fixed)
LOW	+9 dB (Fixed)
OFF	0 dB

•The VS gen-lock mode has its own menu for horizontal and subcarrier phase adjustaments. When the cable length of the video output or the gen-lock input is changed, the horizontal phase must be re-adjusted.

•When the HD/VD or VD pulse is to be used, supply them to the VBS/HD connector and the VD connector on the rear panel of the camera control unit.

6-1. Internal Sync Mode (INT)

RGB Sync Output Level Adjustment (RGB SYNC)

1.Move the cursor to the SYNC parameter.

2.Press the PAGE button. The SYNC menu appears on the monitor screen.

**	SYNC **
RGB SYNC
		0.3V

6. Synchronization Setting (SYNC)

This model accepts the VBS signal (color composite video or blackburst signal) and VS signal (B/W com- posite video or composite sync signal ) for gen-lock operation.

It also accepts the combined vertical (VD) and hori- zontal (HD) drive pulse, and the vertical drive pulse (VD) only.

** SET UP **

CAMERA ID	*OFF
FLD/FRM	FLD
ELC	*OFF
SHUTTER	OFF
GAIN	AUTO
SYNC	*INT
BLACK BAL	ABC
SCENE FILE	*SCENE1
END

Imporant Notices:

•The sync mode priority is as follows:

1.Color composite video signal (VBS)

2.B/W composite video signal (VS)

3.HD/VD signal

4.VD signal

5.Internal sync (INT)

•When the internal sync (INT) mode is to be used, no gen-lock input signal should be supplied to the gen- lock input connector on the rear panel of the camera contrrol unit.

•When the VBS or VS gen-lock mode is to be used, supply the gen-lock input signal to the gen-lock input connector on the rear panel of the camera control unit.

•The VBS gen-lock mode has its own menu for horizon- tal and subcarrier phase adjustments. When the cable length of the video output or the gen-lock input is changed, horizontal and subcarrier phase must be re- adjustable.

RET END

3.Move the cursor to the RGB SYNC parameter.

4.Select 4.0V or 0.3V according to the RGB monitor input level.

6-2. VBS Gen-lock Mode (EXT(VBS))

1.Move the cursor to the SYNC parameter.

2.Connect the coaxial cable for the blackburst or com- posite color video signal to the gen-lock input connec- tor.

3.Confirm that the INT parameter changed to EXT(VBS) on the menu.

Caution: The gen-lock input signal should meet the EIA RS-170A specifications and should not contain jitter, such as a VCR playback signal, as it could disturb synchronization.

** SET UP **

CAMERA ID	*OFF
FLD/FRM	FLD
ELC	*OFF
SHUTTER	OFF
GAIN	AUTO
SYNC	*EXT(VBS)
BLACK BAL	ABC
SCENE FILE	*SCENE1
END