Axis Communications 463001 LED Indicators, SD Card Slot, Control Button, LED indicators in camera

Page 10

AXIS Q1604-E Network Camera

Hardware Overview

SD Card Slot

An SD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Control Button

The control button is used for:

•Enabling the Focus Assistant. Press and very quickly release the Control button.

•Resetting the product to factory default settings. See page 54.

•Connecting to an AXIS Video Hosting System service. See page 47. To connect, press and hold the button for about 1 second until the Status LED flashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 47. To connect, press and hold the button for about 3 seconds.

LED Indicators

LED indicators in camera

LED	Color	Indication

Network	Green	Steady for connection to a 100 Mbit/s network. Flashes for network activity.

	Amber	Steady for connection to 10 Mbit/s network. Flashes for network activity.

	Unlit	No network connection.

Status	Green	Steady green for normal operation.

	Amber	Steady during startup, during reset to factory default or when restoring settings.

	Red	Slow flash for failed upgrade.

Power	Green	Normal operation.

	Amber	Flashes green/amber during firmware upgrade.

Note

•The Status LED can be configured to flash while an event is active.

•The Status LED can be configured to be unlit during normal operation, or to flash only when the camera is accessed. To configure, go to Setup > System Options > LED settings. See the online help files for more information.

•The Status LED can be configured to flash for identifying the unit. This can be done under Setup > System Options >

Maintenance.

Status LED on housing (fan and heater)

Color	Indication

Green	OK

Flashing	Single flash: Heater error
green	Double flash: Fan error
	Triple flash: General error
	Alarm events will be triggered through the camera’s input port.
	See the User’s Manual, available on the CD provided with this product, or from www.axis.com
	Contact your Axis reseller for information about spare parts and troubleshooting.

10

Image 10

Contents Axis Q1604-E Network Camera Liability About this documentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1604-E Network CameraTechnical Specifications Hardware Overview Hardware OverviewAxis Q1604-E Network Camera Axis Q1604-E Network Camera Cold Startup Delay Switch Connectors and ButtonsSD Card Slot LED IndicatorsLED indicators in camera Control ButtonHardware Overview Status LED Behavior for Focus Assistant Replacing the lensAccessing the Product Accessing the ProductAccess from a Browser Set the Root Password Accessing the Product Access from the InternetClick Use Https Controls on the Live View Configure Capture ModeLive View Manual TriggerAxis Media Control viewer toolbar Go to Setup EventsAMC Audio Controls Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Basic Setup Setting Up the ProductSetting Up the Product Adjust FocusSetting Up the Product Focus Assistant Video Stream Video and AudioVideo and Audio Pixel CounterImage 264Go to Setup Video & Audio Camera Settings Camera SettingsCapture Mode Stream ProfilesWhite Balance Exposure SettingsImage Appearance Wide Dynamic RangeSet Shutter to OverlayShutter & Gain IR cut filterOverlay Image Privacy MaskGo to Video & Audio Overlay Image Audio Modes Video and Audio Audio SettingsAudio Input Audio Clips Audio OutputLive View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsFor more information about I/O ports, see I/O Ports, on Camera Tampering DetectorsDetectors Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersLow level 0% Default valuesAudio Detection Recommended valuesApplications Install ApplicationApplications Application LicensesAxis Q1604-E Network Camera Events EventsSetting Up an Action Rule Go to Events Action Rules and click AddRecipient Use with action Setting Up an Email RecipientEvents Recipients Go to Events Recipients and click AddGo to Events Schedules and click Add SchedulesRecurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersCertificates IeeeGo to System Options Security Ieee Date & Time Go to Setup System Options Security CertificatesAudio Support Basic TCP/IP Settings System Options NetworkDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Video Hosting System AvhsLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM BonjourNetwork Share System Options StorageSD Card Go to System Options Storage and click SD CardPorts MaintenancePorts & Devices Port StatusSystem Options Support AdvancedPlain Config Reset to Factory Default SettingsFile Upload Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Setup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general SettingsStorage and disk management problems Storage disruptionTechnical Specifications Technical SpecificationsInstallation aids Function/group Specifications Audio Audio streamingAlarm actions Input/output Audio inputConnectors Function Pin Specifications Performance Considerations Audio Input Audio OutputM5.3