Axis Communications 463001 user manual Date & Time, Audio Support

Page 45

AXIS Q1604-E Network Camera

System Options

1.Go to Setup > System Options > Security > Certificates.

2.Click Create self-signed certificate and provide the requested information. To create and install a CA-signed certificate:

1.Create a self-signed certificate as described above.

2.Go to Setup > System Options > Security > Certificates.

3.Click Create certificate signing request and provide the requested information.

4.Copy the PEM-formatted request and send to the CA of your choice.

5.When the signed certificate is returned, click Install certificate and upload the certificate.

Server/Client certificates can be installed as Certificate from signing request or as Certificate and private key. Select Certificate and private key if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.

The Axis product is shipped with several preinstalled CA certificates. If required, additional CA certificates can be installed:

1.Go to Setup > System Options > Security > Certificates.

2.Click Install certificate and upload the certificate.

Audio Support

Select Enable audio support to allow clients to retrieve audio streams from the Axis product. For information on how to configure audio settings, see Audio Settings, on page 27.

Note

Deselecting this option will disable audio globally in the Axis product, for configured events and profiles with audio as well.

Date & Time

The Axis product’s date and time settings are configured under System Options > Date & Time.

Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see below).

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time – Sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server – Obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 48.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 47.

•Set manually – Allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Axis Q1604-E Network Camera Legal Considerations About this documentLiability Intellectual Property RightsLearn More SupportAxis Q1604-E Network Camera Table of ContentsTechnical Specifications Hardware Overview Hardware OverviewAxis Q1604-E Network Camera Axis Q1604-E Network Camera Connectors and Buttons Cold Startup Delay SwitchLED indicators in camera LED IndicatorsSD Card Slot Control ButtonReplacing the lens Hardware Overview Status LED Behavior for Focus AssistantAccessing the Product Accessing the ProductAccess from a Browser Accessing the Product Access from the Internet Set the Root PasswordClick Use Https Live View Configure Capture ModeControls on the Live View Manual TriggerGo to Setup Events Axis Media Control viewer toolbarAMC Audio Controls Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup Adjust FocusSetting Up the Product Focus Assistant Video and Audio Video and AudioVideo Stream Pixel Counter264 ImageCapture Mode Camera SettingsGo to Setup Video & Audio Camera Settings Stream ProfilesImage Appearance Exposure SettingsWhite Balance Wide Dynamic RangeShutter & Gain OverlaySet Shutter to IR cut filterPrivacy Mask Overlay ImageGo to Video & Audio Overlay Image Video and Audio Audio Settings Audio ModesAudio Input Audio Output Audio ClipsLive View Config Live View ConfigDefault Viewer for Browsers Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsFor more information about I/O ports, see I/O Ports, on Detectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAudio Detection Default valuesLow level 0% Recommended valuesApplications Install ApplicationApplications Application LicensesAxis Q1604-E Network Camera Events EventsGo to Events Action Rules and click Add Setting Up an Action RuleEvents Recipients Setting Up an Email RecipientRecipient Use with action Go to Events Recipients and click AddRecurrences SchedulesGo to Events Schedules and click Add Go to Events Recurrences and click AddRecordings RecordingsRecording List Continuous Recording Languages LanguagesSystem Options System OptionsSecurity UsersIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates Date & TimeAudio Support System Options Network Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsDNS Configuration Axis Video Hosting System AvhsHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card System Options StorageNetwork Share Go to System Options Storage and click SD CardPorts & Devices MaintenancePorts Port StatusAdvanced System Options SupportReset to Factory Default Settings Plain ConfigFile Upload Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Video and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings SettingsStorage disruption Storage and disk management problemsTechnical Specifications Technical SpecificationsAlarm actions Function/group Specifications Audio Audio streamingInstallation aids Input/output Audio inputConnectors Function Pin Specifications Audio Input Audio Output Performance ConsiderationsM5.3
Top Page Image Contents