Axis Communications 463001 user manual Advanced TCP/IP Settings, Axis Video Hosting System Avhs

Page 47

AXIS Q1604-E Network Camera

System Options

ping -l 408 -t <IP address>

Windows example (this may require that you run the command prompt as an administrator)

arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125

4.Check that the network cable is connected and then restart the product by disconnecting and reconnecting power.

5.Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar.

6.Open a browser and type http://<IP address> in the Location/Address field.

For other methods of assigning the IP address, see the Installation and Management Software CD or the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/techsup

Note

•To open a command prompt in Windows, open the Start menu and type cmd in the Run/Search field.

•To use the ARP command in Windows 7/Windows Vista, right-click the command prompt icon and select Run as administrator.

•To open a command prompt in Mac OS X, open the Terminal utility from Application > Utilities.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

The AVHS settings are configured under System Options > Network > TCP IP > Basic. The possibility to connect to an AVHS service is enabled by default. To disable, clear the Enable AVHS box.

One-click enabled - Press the product’s control button (see Hardware Overview, on page 6 ) to connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.

Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the one-click installation.

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. Under Services, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currently registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

Note

AXIS Internet Dynamic DNS Service requires IPv4.

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server.

To make manual settings, select Use the following DNS server address and specify the following:

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Axis Q1604-E Network Camera Intellectual Property Rights About this documentLegal Considerations LiabilityLearn More SupportAxis Q1604-E Network Camera Table of ContentsTechnical Specifications Hardware Overview Hardware OverviewAxis Q1604-E Network Camera Axis Q1604-E Network Camera Connectors and Buttons Cold Startup Delay SwitchControl Button LED IndicatorsLED indicators in camera SD Card SlotReplacing the lens Hardware Overview Status LED Behavior for Focus AssistantAccess from a Browser Accessing the ProductAccessing the Product Click Use Https Accessing the Product Access from the InternetSet the Root Password Manual Trigger Configure Capture ModeLive View Controls on the Live ViewAMC Audio Controls Go to Setup EventsAxis Media Control viewer toolbar Axis Media Control AMC How to Stream H.264Media Streams Media StreamsAlternative Methods of Accessing the Video Stream Accessing Audio Streams Adjust Focus Setting Up the ProductSetting Up the Product Basic SetupSetting Up the Product Focus Assistant Pixel Counter Video and AudioVideo and Audio Video Stream264 ImageStream Profiles Camera SettingsCapture Mode Go to Setup Video & Audio Camera SettingsWide Dynamic Range Exposure SettingsImage Appearance White BalanceIR cut filter OverlayShutter & Gain Set Shutter toGo to Video & Audio Overlay Image Privacy MaskOverlay Image Audio Input Video and Audio Audio SettingsAudio Modes Audio Output Audio ClipsDefault Viewer for Browsers Live View ConfigLive View Config Output Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksFor more information about I/O ports, see I/O Ports, on Motion Detection DetectorsDetectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsRecommended values Default valuesAudio Detection Low level 0%Application Licenses Install ApplicationApplications ApplicationsAxis Q1604-E Network Camera Events EventsGo to Events Action Rules and click Add Setting Up an Action RuleGo to Events Recipients and click Add Setting Up an Email RecipientEvents Recipients Recipient Use with actionGo to Events Recurrences and click Add SchedulesRecurrences Go to Events Schedules and click AddContinuous Recording RecordingsRecordings Recording ListLanguages LanguagesUsers System OptionsSystem Options SecurityGo to System Options Security Ieee IeeeCertificates Audio Support Go to Setup System Options Security CertificatesDate & Time System Options Network Basic TCP/IP SettingsAxis Video Hosting System Avhs Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationNAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Go to System Options Storage and click SD Card System Options StorageSD Card Network SharePort Status MaintenancePorts & Devices PortsAdvanced System Options SupportFile Upload Reset to Factory Default SettingsPlain Config Checking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsStorage disruption Storage and disk management problemsTechnical Specifications Technical SpecificationsInput/output Audio input Function/group Specifications Audio Audio streamingAlarm actions Installation aidsConnectors Function Pin Specifications Audio Input Audio Output Performance ConsiderationsM5.3
Top Page Image Contents