Axis Communications 463001 user manual Events

Page 37

AXIS Q1604-E Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available action rule triggers and conditions include:

•Applications – Use installed applications to trigger the rule. See Applications, on page 35.

•Detectors

-Audio Detection – Trigger the rule when audio is detected. SeeAudio Detection, on page 34.

-Day/Night Mode – Trigger the rule when the product switches between day mode (IR cut filter on) and night mode (IR cut filter off). This can for example be used to control an external infrared (IR) light connected to an output port.

-Live Stream Accessed – Trigger the rule when any stream is accessed and during edge storage playback. This can for example be used to send notifications.

-Motion Detection – Trigger the rule when motion is detected. See Motion Detection, on page 32.

-Tampering – Trigger the rule when tampering is detected. SeeCamera Tampering, on page 32.

•Hardware

-Network – Trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

-Temperature – Trigger the rule if the temperature falls outside or inside the operating range of the product. This can for example be used to send maintenance notifications.

•Input Signal

-Digital Input Port – Trigger the rule when an I/O port receives a signal from a connected device. SeeI/O Ports, on page 52.

-Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. SeeControls on the Live View Page, on page 14. This can for example be used to validate actions during product installation and configuration.

-Virtual Inputs – can be used by a VMS (Video Management System) to trigger actions. Virtual inputs can, for example, be connected to buttons in the VMS user interface.

•Storage

-Disruption – Trigger the rule if storage problems are detected, for example if the storage device is unavailable, removed, full, locked or if other read or write problems occur. This can for example be used to send maintenance notifications.

•System

-System Ready – Trigger the rule when the product has been started and all services are running. This can for example be used to send a notification when the product restarts.

•Time

-Recurrence – Trigger the rule periodically. SeeRecurrences, on page 40. This can for example be used to upload an image every 5 minutes.

-Use Schedule – Trigger the rule according to the selected schedule. See Schedules, on page 40.

Available actions include:

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Axis Q1604-E Network Camera Legal Considerations About this documentLiability Intellectual Property RightsLearn More SupportAxis Q1604-E Network Camera Table of ContentsTechnical Specifications Hardware Overview Hardware OverviewAxis Q1604-E Network Camera Axis Q1604-E Network Camera Connectors and Buttons Cold Startup Delay SwitchLED indicators in camera LED IndicatorsSD Card Slot Control ButtonReplacing the lens Hardware Overview Status LED Behavior for Focus AssistantAccessing the Product Accessing the ProductAccess from a Browser Set the Root Password Accessing the Product Access from the InternetClick Use Https Live View Configure Capture ModeControls on the Live View Manual TriggerAxis Media Control viewer toolbar Go to Setup EventsAMC Audio Controls Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup Adjust FocusSetting Up the Product Focus Assistant Video and Audio Video and AudioVideo Stream Pixel Counter264 ImageCapture Mode Camera SettingsGo to Setup Video & Audio Camera Settings Stream ProfilesImage Appearance Exposure SettingsWhite Balance Wide Dynamic RangeShutter & Gain OverlaySet Shutter to IR cut filterOverlay Image Privacy MaskGo to Video & Audio Overlay Image Audio Modes Video and Audio Audio SettingsAudio Input Audio Output Audio ClipsLive View Config Live View ConfigDefault Viewer for Browsers Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsFor more information about I/O ports, see I/O Ports, on Detectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAudio Detection Default valuesLow level 0% Recommended valuesApplications Install ApplicationApplications Application LicensesAxis Q1604-E Network Camera Events EventsGo to Events Action Rules and click Add Setting Up an Action RuleEvents Recipients Setting Up an Email RecipientRecipient Use with action Go to Events Recipients and click AddRecurrences SchedulesGo to Events Schedules and click Add Go to Events Recurrences and click AddRecordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Date & Time Go to Setup System Options Security CertificatesAudio Support System Options Network Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsDNS Configuration Axis Video Hosting System AvhsHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card System Options StorageNetwork Share Go to System Options Storage and click SD CardPorts & Devices MaintenancePorts Port StatusAdvanced System Options SupportPlain Config Reset to Factory Default SettingsFile Upload Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Video and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings SettingsStorage disruption Storage and disk management problemsTechnical Specifications Technical SpecificationsAlarm actions Function/group Specifications Audio Audio streamingInstallation aids Input/output Audio inputConnectors Function Pin Specifications Audio Input Audio Output Performance ConsiderationsM5.3
Top Page Image Contents