Classe Audio SSP-800 owner manual Front Panel, Standby/On Switch, Menu On/Off Switch

Page 13

1

2

3

4

5

6

MENU

MUTE

SSP-800

Front Panel

The front panel of the SSP-800 is shown above. The numbers in the drawing refer to the descriptions that follow.

1Standby/On Switch

Pressing the Standby button puts the SSP-800 into standby mode – a low-power state which leaves the Surround Sound Processor and outputs inactive but still allows the processor to respond to system commands via any of the supported control protocols (IR input, CAN-Bus, RS-232, or triggers).

If the processor is already in Standby mode, pressing the Standby button fully powers up the SSP-800.

•LED On – the SSP-800 is in Standby mode, or the display has timed out due to a display setting.

•LED ﬂashes (at power-up) – the SSP-800 is in the process of power-up initialization.

•LED Oﬀ – the SSP-800 is powered on, fully operational, and the display active.

•LED ﬂashes rapidly (after power-up) – the AC mains voltage is out of range.

2Menu On/Off Switch

Press once to call up the main page of the menu system, which replaces the normal front page or Home page of the Touchscreen and OSD (On-Screen Display). Press the Menu button again to revert to the Home page.

The menu system gives you control over operational details including: system setup options, various display options (including the language used by the menu system), and custom installation capabilities so that the SSP-800 integrates smoothly into the most complex systems. For more information, see The Menu System later in this manual.

13

Image 13

Contents SSP-800 Surround Sound Processor Page Important Safety Instructions Contents Configuration Use Video Next input Welcome to the Classé family IntroductionExceptional Design Features Page Unpacking your SSP-800 Unpacking and Placement Placement considerations Warm-up/break-in period Operating voltage Voltage protection Menu On/Off Switch Standby/On SwitchFront Panel Touchscreen Volume Control KnobAudio Mute Control IR windowVideo Inputs Rear PanelComponent Video Inputs Composite Video InputsHdmi Inputs Component Video Output Hdmi OutputsDigital Audio Inputs Coaxial Digital Audio Inputs OpticalDigital Audio Output Optical Digital Audio Output Coaxial11 7.1-Channel Analog Audio Inputs 12 2-Channel Balanced Analog Audio InputsIR Output IR InputTrigger Outputs USB Port 18 RS-232 Port20 10-Channel Analog Outputs CAN-Bus Input and OutputAC Power Cord Input Main Power On/Off SwitchBasic Functions Remote ControlAudio Processing Functions Input Sel Selection ButtonVolume Control & Mute Buttons Preset Config Configuration ButtonNavigation & Menu Buttons Function Keys F1 to F4Step Initial SetupChoose the appropriate cables Connect all source components to the SSP-800 rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name DTS-HD Post-processingSource selection Using the SSP-800Name Description Mode selectionData in the soundtrack System trims ControlsConfiguration select Menu System Volume setup System setupMax volume Startup volume IR setup Automation Mute setup Name Input setupAudio Configuration Triggers Use Video Next inputProfiles Room EQ Configuration Name Distances Use Speakers LevelsSpeakers available Auxiliary channels Teach IR Black levelBrightness Timeout Display setupLanguage OSD on screen display Colors Volume Dolby Pro Logic DTS Neo6 Dolby/DTSImportant note on Fkey use Remote FkeysVersion info Sensors FeaturesClassé Delta Series Products Hardware setupCategory 5 Network Cables CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface BoxUsing CAN-Bus Configuration Operate AC status Status CAN-Bus shared featuresPlayLink Amp info Event log Everything appears to be powered on, but there is no sound TroubleshootingThere is no sound and the Standby LED is not lit Only one speaker seems to be playing IR remote control does not seem to functionThere is a hum coming out of the speakers There is a hum coming from the SSP-800Voltage Protection Circuit Input factory defaults Care & MaintenanceOverall dimensions SpecificationsNet weight Shipping weightDimensions Installation Worksheet Page North America 1 800 370 3740 email classe@bwgroupusa.com