name
distances
The Name button provides a way to customize the names of the speaker configurations. Each name can be up to 14 characters long.
To change a configuration name to something more specific to your system, use the four buttons along the bottom of the Configuration Name menu. The buttons provide the following functions:
•The left arrow button acts like the backspace key on a computer keyboard. Touch this button to delete characters by moving the cursor to the left.
•The right arrow button adds characters by moving the cursor to the right.
•The + and – buttons allow you to change the current character by scrolling through the available list of characters. This list includes all upper- and
When you’ve completed modifying the configuration name, touch the Back button to return to the Configuration Setup menu.
The Distances setup page allows you to adjust the speaker distances to accurately reflect the actual placement of your speakers. Touch the speaker location you wish to adjust and then measure the distance between each speaker and the primary listening place with a tape measure or equivalent. You can then enter the resulting distance value into the menu by touching the decrease or increase buttons, shown below.
NOTE: You may find that some speaker options are not available for selection. Those speakers do not currently exist in that specific configuration. The speaker selections for each configuration are made on the Speakers page, which will be discussed in the sections which follow.
45