Classe Audio SSP-800 owner manual Important Safety Instructions

Page 3

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.

16.To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.

17.The mains plug of the power supply cord shall remain readily operable.

18. Do not expose batteries to excessive heat such as sunshine, fire or the like.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT

REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED PERSONNEL.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage “ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

3

Image 3
Contents SSP-800 Surround Sound Processor Page Important Safety Instructions Contents Configuration Use Video Next input Welcome to the Classé family IntroductionExceptional Design Features Page Unpacking your SSP-800 Unpacking and PlacementPlacement considerations Warm-up/break-in period Operating voltage Voltage protection Standby/On Switch Menu On/Off SwitchFront Panel IR window Volume Control KnobTouchscreen Audio Mute ControlVideo Inputs Rear PanelComposite Video Inputs Component Video InputsHdmi Inputs Digital Audio Inputs Optical Hdmi OutputsComponent Video Output Digital Audio Inputs Coaxial12 2-Channel Balanced Analog Audio Inputs Digital Audio Output CoaxialDigital Audio Output Optical 11 7.1-Channel Analog Audio InputsUSB Port 18 RS-232 Port IR InputIR Output Trigger Outputs20 10-Channel Analog Outputs CAN-Bus Input and OutputAC Power Cord Input Main Power On/Off SwitchInput Sel Selection Button Remote ControlBasic Functions Audio Processing FunctionsFunction Keys F1 to F4 Preset Config Configuration ButtonVolume Control & Mute Buttons Navigation & Menu ButtonsInitial Setup StepChoose the appropriate cables Connect all source components to the SSP-800 rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name DTS-HD Post-processingSource selection Using the SSP-800Name Description Mode selectionData in the soundtrack System trims ControlsConfiguration select Menu System Volume setup System setupMax volume Startup volume IR setup Automation Mute setup Name Input setupAudio Configuration Triggers Use Video Next inputProfiles Room EQ Configuration Name Distances Use Speakers LevelsSpeakers available Auxiliary channels Teach IR Black levelBrightness Timeout Display setupLanguage OSD on screen display Colors Volume Dolby Pro Logic DTS Neo6 Dolby/DTSImportant note on Fkey use Remote FkeysVersion info Sensors FeaturesCAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface Box Hardware setupClassé Delta Series Products Category 5 Network CablesUsing CAN-Bus Configuration Operate AC status Status CAN-Bus shared featuresPlayLink Amp info Event log Troubleshooting Everything appears to be powered on, but there is no soundThere is no sound and the Standby LED is not lit There is a hum coming from the SSP-800 IR remote control does not seem to functionOnly one speaker seems to be playing There is a hum coming out of the speakersVoltage Protection Circuit Input factory defaults Care & MaintenanceShipping weight SpecificationsOverall dimensions Net weightDimensions Installation Worksheet Page North America 1 800 370 3740 email classe@bwgroupusa.com